← Katalog
Najedź na zdjęcie, aby powiększyć
6720
Kevlar end mill CR 100
Kevlar end mill CR 100. Designation: Kevlar end mill CR 100, Diameter range: 4.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844125223, Cutting material: Solid carbide, Surface: Cristall F, Product family: CR 100, Back rake angle: 10, Length picto milling: medium, Type of machine interface: HA, Corner design: Schneidecke 90°, Feed direction: with drilling
Specyfikacja techniczna
- EAN
- 4049844125223
- Surface
- Cristall F
- Designation
- Kevlar end mill CR 100
- Corner design
- Schneidecke 90°
- Diameter range
- 4.000 mm – 16.000 mm
- Feed direction
- with drilling
- Product family
- CR 100
- Back rake angle
- 10
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- medium
- Type of machine interface
- HA
Wymiary i kody zamówieniowe
| Kod zamówienia | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Dostępność | Zapytaj o cenę |
|---|---|---|---|---|---|---|---|
| 6720 12.000 | 46.00 mm | 45.00 mm | 93.00 mm | 12.00 mm | 12.00 mm | Na zapytanie | |
| 6720 16.000 | 58.00 mm | 48.00 mm | 108.00 mm | 16.00 mm | 16.00 mm | Na zapytanie | |
| 6720 10.000 | 38.00 mm | 40.00 mm | 80.00 mm | 10.00 mm | 10.00 mm | Na zapytanie | |
| 6720 6.000 | 28.00 mm | 36.00 mm | 65.00 mm | 6.00 mm | 6.00 mm | Na zapytanie | |
| 6720 8.000 | 34.00 mm | 36.00 mm | 75.00 mm | 8.00 mm | 8.00 mm | Na zapytanie | |
| 6720 4.000 | 20.00 mm | 28.00 mm | 55.00 mm | 4.00 mm | 4.00 mm | Na zapytanie |