← Katalog
Najedź na zdjęcie, aby powiększyć
6716
Pilot end mill RF 100 P
Pilot end mill RF 100 P. Designation: Pilot end mill RF 100 P, Diameter range: 1.400 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"partial"}], EAN: 4049844117150, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 3, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Feed direction: with drilling
Specyfikacja techniczna
- EAN
- 4049844117150
- Type
- N
- Designation
- Pilot end mill RF 100 P
- Helix angle
- 30
- Diameter range
- 1.400 mm – 12.000 mm
- Feed direction
- with drilling
- Back rake angle
- 3
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"partial"}]
- Length picto milling
- long
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 4
Wymiary i kody zamówieniowe
| Kod zamówienia | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Dostępność | Zapytaj o cenę |
|---|---|---|---|---|---|---|---|
| 6716 3.500 | 14.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 3.50 mm | Na zapytanie | |
| 6716 11.000 | 35.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 11.00 mm | Na zapytanie | |
| 6716 7.000 | 22.50 mm | 36.00 mm | 63.00 mm | 8.00 mm | 7.00 mm | Na zapytanie | |
| 6716 4.000 | 15.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 4.00 mm | Na zapytanie | |
| 6716 2.100 | 9.00 mm | 28.00 mm | 38.00 mm | 3.00 mm | 2.10 mm | Na zapytanie | |
| 6716 9.000 | 27.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 9.00 mm | Na zapytanie | |
| 6716 6.000 | 19.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 6.00 mm | Na zapytanie | |
| 6716 3.000 | 11.50 mm | 36.00 mm | 57.00 mm | 6.00 mm | 3.00 mm | Na zapytanie | |
| 6716 8.000 | 25.50 mm | 40.00 mm | 72.00 mm | 10.00 mm | 8.00 mm | Na zapytanie | |
| 6716 10.000 | 30.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 10.00 mm | Na zapytanie | |
| 6716 7.500 | 22.50 mm | 36.00 mm | 63.00 mm | 8.00 mm | 7.50 mm | Na zapytanie | |
| 6716 2.300 | 9.00 mm | 28.00 mm | 38.00 mm | 3.00 mm | 2.30 mm | Na zapytanie | |
| 6716 2.800 | 9.50 mm | 28.00 mm | 38.00 mm | 3.00 mm | 2.80 mm | Na zapytanie | |
| 6716 1.400 | 5.00 mm | 28.00 mm | 38.00 mm | 3.00 mm | 1.40 mm | Na zapytanie | |
| 6716 12.000 | 36.00 mm | 45.00 mm | 83.00 mm | 14.00 mm | 12.00 mm | Na zapytanie | |
| 6716 5.500 | 19.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.50 mm | Na zapytanie | |
| 6716 4.500 | 16.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 4.50 mm | Na zapytanie | |
| 6716 1.800 | 8.00 mm | 28.00 mm | 38.00 mm | 3.00 mm | 1.80 mm | Na zapytanie | |
| 6716 2.000 | 8.50 mm | 28.00 mm | 38.00 mm | 3.00 mm | 2.00 mm | Na zapytanie | |
| 6716 2.500 | 9.00 mm | 28.00 mm | 38.00 mm | 3.00 mm | 2.50 mm | Na zapytanie | |
| 6716 1.500 | 6.00 mm | 28.00 mm | 38.00 mm | 3.00 mm | 1.50 mm | Na zapytanie | |
| 6716 6.500 | 19.50 mm | 36.00 mm | 63.00 mm | 8.00 mm | 6.50 mm | Na zapytanie | |
| 6716 8.500 | 27.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 8.50 mm | Na zapytanie | |
| 6716 5.000 | 18.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.00 mm | Na zapytanie |