← Katalog
Najedź na zdjęcie, aby powiększyć
6980
Ratio end mill RF 100 AL
Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844296589, Cutting material: Solid carbide, Surface: Carbo, Product family: RF 100 A, Helix angle: 39/40/41, Back rake angle: 10, Length picto milling: long, Number of cutting edges range (from/to): 3, Type of machine interface: HA, Feed direction: with drilling
Specyfikacja techniczna
- EAN
- 4049844296589
- Surface
- Carbo
- Designation
- Ratio end mill RF 100 AL
- Helix angle
- 39/40/41
- Diameter range
- 5.000 mm – 20.000 mm
- Feed direction
- with drilling
- Product family
- RF 100 A
- Back rake angle
- 10
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 3
Wymiary i kody zamówieniowe
| Kod zamówienia | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Dostępność | Zapytaj o cenę |
|---|---|---|---|---|---|---|---|
| 6980 8.000 | 26.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Na zapytanie | |
| 6980 12.000 | 35.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Na zapytanie | |
| 6980 16.000 | 43.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Na zapytanie | |
| 6980 20.000 | 52.00 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | Na zapytanie | |
| 6980 6.000 | 19.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | Na zapytanie | |
| 6980 10.000 | 30.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Na zapytanie | |
| 6980 5.000 | 17.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.00 mm | Na zapytanie |