← Katalog
Najedź na zdjęcie, aby powiększyć
3871
Standard Ratio end mill RF 100 U
Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}], EAN: 4049844017429, Cutting material: Solid carbide, Product family: RF 100 U, Type: N, Helix angle: 35/38, Back rake angle: 4, Length picto milling: 3xD, Number of cutting edges range (from/to): 4, Type of machine interface: HB
Specyfikacja techniczna
- EAN
- 4049844017429
- Type
- N
- Designation
- Standard Ratio end mill RF 100 U
- Helix angle
- 35/38
- Diameter range
- 6.000 mm – 20.000 mm
- Product family
- RF 100 U
- Back rake angle
- 4
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}]
- Length picto milling
- 3xD
- Type of machine interface
- HB
- Number of cutting edges range (from/to)
- 4
Wymiary i kody zamówieniowe
| Kod zamówienia | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Dostępność | Zapytaj o cenę |
|---|---|---|---|---|---|---|---|
| 3871 10.000 | 36.70 mm | 40.00 mm | 80.00 mm | 10.00 mm | 10.00 mm | Na zapytanie | |
| 3871 6.000 | 22.20 mm | 36.00 mm | 65.00 mm | 6.00 mm | 6.00 mm | Na zapytanie | |
| 3871 8.000 | 29.36 mm | 36.00 mm | 75.00 mm | 8.00 mm | 8.00 mm | Na zapytanie | |
| 3871 20.000 | 73.00 mm | 50.00 mm | 126.00 mm | 20.00 mm | 20.00 mm | Na zapytanie | |
| 3871 16.000 | 58.40 mm | 48.00 mm | 108.00 mm | 16.00 mm | 16.00 mm | Na zapytanie | |
| 3871 12.000 | 44.04 mm | 45.00 mm | 93.00 mm | 12.00 mm | 12.00 mm | Na zapytanie |