← Katalog
Najedź na zdjęcie, aby powiększyć
5582
Standard Ratio end mill RF 100 U
Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 10.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}], EAN: 4031093779371, Cutting material: Solid carbide, Product family: RF 100 U, Type: N, Helix angle: 35/38, Back rake angle: 4, Length picto milling: extra long, Number of cutting edges range (from/to): 4, Type of machine interface: ~HA/HA
Specyfikacja techniczna
- EAN
- 4031093779371
- Type
- N
- Designation
- Standard Ratio end mill RF 100 U
- Helix angle
- 35/38
- Diameter range
- 10.000 mm – 25.000 mm
- Product family
- RF 100 U
- Back rake angle
- 4
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}]
- Length picto milling
- extra long
- Type of machine interface
- ~HA/HA
- Number of cutting edges range (from/to)
- 4
Wymiary i kody zamówieniowe
| Kod zamówienia | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Dostępność | Zapytaj o cenę |
|---|---|---|---|---|---|---|---|
| 5582 12.000 | 53.04 mm | 195.00 mm | 150.00 mm | 12.00 mm | 12.00 mm | Na zapytanie | |
| 5582 20.000 | 78.00 mm | 70.00 mm | 150.00 mm | 20.00 mm | 20.00 mm | Na zapytanie | |
| 5582 16.000 | 75.40 mm | 70.00 mm | 150.00 mm | 16.00 mm | 16.00 mm | Na zapytanie | |
| 5582 10.000 | 46.70 mm | 50.00 mm | 100.00 mm | 10.00 mm | 10.00 mm | Na zapytanie | |
| 5582 25.000 | 91.25 mm | 56.00 mm | 150.00 mm | 25.00 mm | 25.00 mm | Na zapytanie |