Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844216914, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 2, Type of machine interface: ~HB/HB, Feed direction: with drilling

Especificações técnicas

EAN: 4049844216914
Type: N
Designation: Ball nose slot drill (2-fluted)
Helix angle: 30
Diameter range: 4.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: ~HB/HB
Number of cutting edges range (from/to): 2

Dimensões e códigos de encomenda

Código de encomenda	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibilidade
19969 18.000	50.00 mm	1.00 mm	100.00 mm	18.00 mm	18.00 mm	Sob consulta
19969 8.000	28.20 mm	65.00 mm	60.00 mm	8.00 mm	8.00 mm	Sob consulta
19969 4.000	13.00 mm	39.80 mm	50.00 mm	6.00 mm	4.00 mm	Sob consulta
19969 12.000	38.60 mm	75.00 mm	75.00 mm	12.00 mm	12.00 mm	Sob consulta
19969 16.000	42.00 mm	79.00 mm	75.00 mm	16.00 mm	16.00 mm	Sob consulta
19969 20.000	52.00 mm	1.00 mm	100.00 mm	20.00 mm	20.00 mm	Sob consulta
19969 14.000	40.00 mm	82.00 mm	75.00 mm	14.00 mm	14.00 mm	Sob consulta
19969 5.000	16.25 mm	35.00 mm	50.00 mm	6.00 mm	5.00 mm	Sob consulta
19969 10.000	32.50 mm	7.00 mm	70.00 mm	10.00 mm	10.00 mm	Sob consulta
19969 6.000	17.50 mm	52.00 mm	50.00 mm	6.00 mm	6.00 mm	Sob consulta