Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 0.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4031093779807, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 2, Type of machine interface: HA, Feed direction: with drilling

Техничке спецификације

EAN: 4031093779807
Type: N
Designation: Ball nose slot drill (2-fluted)
Helix angle: 30
Diameter range: 0.500 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 2

Димензије и шифре за наручивање

Шифра за наручивање	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Доступност
5585 3.000	11.00 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	На упит
5585 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	На упит
5585 0.500	1.70 mm	28.00 mm	38.00 mm	3.00 mm	0.50 mm	На упит
5585 1.000	3.25 mm	28.00 mm	38.00 mm	3.00 mm	1.00 mm	На упит
5585 1.500	5.50 mm	28.00 mm	38.00 mm	3.00 mm	1.50 mm	На упит
5585 20.000	51.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	На упит
5585 5.000	15.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	На упит
5585 12.000	35.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	На упит
5585 2.000	8.50 mm	36.00 mm	57.00 mm	6.00 mm	2.00 mm	На упит
5585 10.000	29.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	На упит
5585 4.000	12.50 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	На упит
5585 6.000	17.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	На упит