← Каталог
Наведите на изображение для увеличения
3090
End mill (4-fluted)
End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 6.350 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844003262, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: extra long, Number of cutting edges range (from/to): 4
Технические характеристики
- EAN
- 4049844003262
- Type
- N
- Designation
- End mill (4-fluted)
- Helix angle
- 30
- Diameter range
- 6.350 mm – 12.700 mm
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- extra long
- Number of cutting edges range (from/to)
- 4
Размеры и коды для заказа
| Код для заказа | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Наличие | Запросить цену |
|---|---|---|---|---|---|---|---|
| 3090 12.704 | 87.68 mm | 64.72 mm | 152.40 mm | 12.70 mm | 12.70 mm | По запросу | |
| 3090 9.526 | 50.52 mm | 51.08 mm | 101.60 mm | 9.53 mm | 9.53 mm | По запросу | |
| 3090 12.702 | 87.68 mm | 64.72 mm | 152.40 mm | 12.70 mm | 12.70 mm | По запросу | |
| 3090 6.356 | 47.35 mm | 54.25 mm | 101.60 mm | 6.35 mm | 6.35 mm | По запросу | |
| 3090 12.706 | 87.68 mm | 64.72 mm | 152.40 mm | 12.70 mm | 12.70 mm | По запросу | |
| 3090 9.524 | 50.52 mm | 51.08 mm | 101.60 mm | 9.53 mm | 9.53 mm | По запросу | |
| 3090 6.354 | 47.35 mm | 54.25 mm | 101.60 mm | 6.35 mm | 6.35 mm | По запросу | |
| 3090 6.352 | 47.35 mm | 54.25 mm | 101.60 mm | 6.35 mm | 6.35 mm | По запросу | |
| 3090 9.522 | 50.52 mm | 51.08 mm | 101.60 mm | 9.53 mm | 9.53 mm | По запросу |