Roughing end mill GS 100 A (coarse teeth)

Roughing end mill GS 100 A (coarse teeth). Designation: Roughing end mill GS 100 A (coarse teeth), Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093682480, Cutting material: Solid carbide, Surface: bright, Type: W, Helix angle: 30, Back rake angle: 8, Length picto milling: long, Number of cutting edges range (from/to): 3, Type of machine interface: HB, Feed direction: with drilling

Технические характеристики

EAN: 4031093682480
Type: W
Surface: bright
Designation: Roughing end mill GS 100 A (coarse teeth)
Helix angle: 30
Diameter range: 6.000 mm – 25.000 mm
Feed direction: with drilling
Back rake angle: 8
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: HB
Number of cutting edges range (from/to): 3

Размеры и коды для заказа

Код для заказа	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Наличие
3127 14.000	36.00 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	По запросу
3127 16.000	42.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	По запросу
3127 10.000	29.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	По запросу
3127 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	По запросу
3127 6.000	17.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	По запросу
3127 18.000	43.00 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	По запросу
3127 20.000	51.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	По запросу
3127 12.000	35.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	По запросу
3127 25.000	66.00 mm	56.00 mm	121.00 mm	25.00 mm	25.00 mm	По запросу