← Kataloge
Shyira imbeba ku ifoto kugira ngo uyagure
6935
End mill (single-fluted)
End mill (single-fluted). Designation: End mill (single-fluted), Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844714465, Cutting material: Solid carbide, Surface: bright, Helix angle: 30, Back rake angle: 25, Length picto milling: medium, Number of cutting edges range (from/to): 1, Type of machine interface: HA, Corner design: Schneidecke 90°, Feed direction: with drilling
Ibisobanuro bya tekiniki
- EAN
- 4049844714465
- Surface
- bright
- Designation
- End mill (single-fluted)
- Helix angle
- 30
- Corner design
- Schneidecke 90°
- Diameter range
- 3.000 mm – 16.000 mm
- Feed direction
- with drilling
- Back rake angle
- 25
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- medium
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 1
Ingano na kode zo gutumiza
| Kode yo gutumiza | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Ukuboneka | Saba igiciro |
|---|---|---|---|---|---|---|---|
| 6935 4.000 | 27.00 mm | 28.00 mm | 60.00 mm | 4.00 mm | 4.00 mm | Ku busabe | |
| 6935 16.000 | 68.00 mm | 48.00 mm | 120.00 mm | 16.00 mm | 16.00 mm | Ku busabe | |
| 6935 12.000 | 62.00 mm | 45.00 mm | 110.00 mm | 12.00 mm | 12.00 mm | Ku busabe | |
| 6935 5.000 | 28.00 mm | 28.00 mm | 60.00 mm | 5.00 mm | 5.00 mm | Ku busabe | |
| 6935 6.000 | 35.00 mm | 36.00 mm | 80.00 mm | 6.00 mm | 6.00 mm | Ku busabe | |
| 6935 3.000 | 22.00 mm | 28.00 mm | 55.00 mm | 3.00 mm | 3.00 mm | Ku busabe | |
| 6935 8.000 | 39.00 mm | 36.00 mm | 80.00 mm | 8.00 mm | 8.00 mm | Ku busabe | |
| 6935 10.000 | 52.00 mm | 40.00 mm | 100.00 mm | 10.00 mm | 10.00 mm | Ku busabe |