← Katalog
Pas lo zimaz pour agrandi
1326
90° Countersink
90° Countersink. Designation: 90° Countersink, Diameter range: 4.300 mm – 31.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4031093693509, Cutting material: HSS, Surface: TiAlN, Standard: DIN 335, Cutting direction: Right-hand, Form: C
Spesifikasyon teknik
- EAN
- 4031093693509
- Form
- C
- Surface
- TiAlN
- Standard
- DIN 335
- Designation
- 90° Countersink
- Diameter range
- 4.300 mm – 31.000 mm
- Cutting material
- HSS
- Cutting direction
- Right-hand
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
Dimansyon ek kod komann
| Kod komann | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|---|---|
| 1326 6.000 | 5.50 mm | 37.00 mm | 45.00 mm | 5.00 mm | 6.00 mm | Lo demann | |
| 1326 10.400 | 8.00 mm | 38.00 mm | 50.00 mm | 6.00 mm | 10.40 mm | Lo demann | |
| 1326 6.300 | 6.00 mm | 36.00 mm | 45.00 mm | 5.00 mm | 6.30 mm | Lo demann | |
| 1326 11.500 | 10.00 mm | 44.00 mm | 56.00 mm | 8.00 mm | 11.50 mm | Lo demann | |
| 1326 23.000 | 15.00 mm | 46.00 mm | 67.00 mm | 10.00 mm | 23.00 mm | Lo demann | |
| 1326 10.000 | 8.00 mm | 38.00 mm | 50.00 mm | 6.00 mm | 10.00 mm | Lo demann | |
| 1326 13.400 | 10.00 mm | 42.00 mm | 56.00 mm | 8.00 mm | 13.40 mm | Lo demann | |
| 1326 5.300 | 5.00 mm | 32.00 mm | 40.00 mm | 4.00 mm | 5.30 mm | Lo demann | |
| 1326 30.000 | 22.00 mm | 45.00 mm | 71.00 mm | 12.00 mm | 30.00 mm | Lo demann | |
| 1326 12.400 | 10.00 mm | 43.00 mm | 56.00 mm | 8.00 mm | 12.40 mm | Lo demann | |
| 1326 7.300 | 7.00 mm | 40.00 mm | 50.00 mm | 6.00 mm | 7.30 mm | Lo demann | |
| 1326 5.800 | 5.50 mm | 37.00 mm | 45.00 mm | 5.00 mm | 5.80 mm | Lo demann | |
| 1326 9.400 | 8.00 mm | 39.00 mm | 50.00 mm | 6.00 mm | 9.40 mm | Lo demann | |
| 1326 31.000 | 22.00 mm | 45.00 mm | 71.00 mm | 12.00 mm | 31.00 mm | Lo demann | |
| 1326 26.000 | 20.00 mm | 44.00 mm | 67.00 mm | 10.00 mm | 26.00 mm | Lo demann | |
| 1326 16.500 | 12.50 mm | 44.00 mm | 60.00 mm | 10.00 mm | 16.50 mm | Lo demann | |
| 1326 8.000 | 7.50 mm | 40.00 mm | 50.00 mm | 6.00 mm | 8.00 mm | Lo demann | |
| 1326 4.300 | 3.50 mm | 33.00 mm | 40.00 mm | 4.00 mm | 4.30 mm | Lo demann | |
| 1326 5.000 | 4.50 mm | 32.00 mm | 40.00 mm | 4.00 mm | 5.00 mm | Lo demann | |
| 1326 15.000 | 12.50 mm | 46.00 mm | 60.00 mm | 10.00 mm | 15.00 mm | Lo demann | |
| 1326 20.500 | 15.00 mm | 44.00 mm | 63.00 mm | 10.00 mm | 20.50 mm | Lo demann | |
| 1326 19.000 | 15.00 mm | 46.00 mm | 63.00 mm | 10.00 mm | 19.00 mm | Lo demann | |
| 1326 7.000 | 6.50 mm | 41.00 mm | 50.00 mm | 6.00 mm | 7.00 mm | Lo demann | |
| 1326 28.000 | 22.00 mm | 47.00 mm | 71.00 mm | 12.00 mm | 28.00 mm | Lo demann | |
| 1326 8.300 | 7.50 mm | 40.00 mm | 50.00 mm | 6.00 mm | 8.30 mm | Lo demann | |
| 1326 25.000 | 20.00 mm | 44.00 mm | 67.00 mm | 10.00 mm | 25.00 mm | Lo demann |