Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844220188, Cutting material: Solid carbide, Surface: bright, Type: W, Helix angle: 35, Back rake angle: 15, Length picto milling: short, Number of cutting edges range (from/to): 2, Type of machine interface: HA, Corner design: Schneidecke 90°, Feed direction: with drilling

Spesifikasyon teknik

EAN: 4049844220188
Type: W
Surface: bright
Designation: Al slot drill (2-fluted)
Helix angle: 35
Corner design: Schneidecke 90°
Diameter range: 2.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 15
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: short
Type of machine interface: HA
Number of cutting edges range (from/to): 2

Dimansyon ek kod komann

Kod komann	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibilite
19994 14.000	28.00 mm	45.00 mm	75.00 mm	14.00 mm	14.00 mm	Lo demann
19994 5.000	11.50 mm	36.00 mm	50.00 mm	6.00 mm	5.00 mm	Lo demann
19994 18.000	35.00 mm	48.00 mm	84.00 mm	18.00 mm	18.00 mm	Lo demann
19994 16.000	32.00 mm	48.00 mm	82.00 mm	16.00 mm	16.00 mm	Lo demann
19994 12.000	25.00 mm	45.00 mm	73.00 mm	12.00 mm	12.00 mm	Lo demann
19994 10.000	21.00 mm	40.00 mm	66.00 mm	10.00 mm	10.00 mm	Lo demann
19994 6.000	14.00 mm	36.00 mm	50.00 mm	6.00 mm	6.00 mm	Lo demann
19994 3.000	8.00 mm	28.00 mm	40.00 mm	4.00 mm	3.00 mm	Lo demann
19994 20.000	39.00 mm	50.00 mm	92.00 mm	20.00 mm	20.00 mm	Lo demann
19994 8.000	17.00 mm	36.00 mm	58.00 mm	8.00 mm	8.00 mm	Lo demann
19994 4.000	9.50 mm	36.00 mm	50.00 mm	6.00 mm	4.00 mm	Lo demann
19994 2.000	5.50 mm	28.00 mm	40.00 mm	4.00 mm	2.00 mm	Lo demann