Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093673273, Cutting material: Solid carbide, Surface: bright, Type: W, Helix angle: 45, Back rake angle: 25, Length picto milling: long, Number of cutting edges range (from/to): 2, Type of machine interface: HA, Feed direction: with drilling

Spesifikasyon teknik

EAN: 4031093673273
Type: W
Surface: bright
Designation: Al slot drill (2-fluted)
Helix angle: 45
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 25
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 2

Dimansyon ek kod komann

Kod komann	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibilite
3309 12.000	31.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Lo demann
3309 4.000	11.00 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Lo demann
3309 14.001	36.00 mm	48.00 mm	92.00 mm	16.00 mm	14.00 mm	Lo demann
3309 14.000	32.00 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Lo demann
3309 20.000	46.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Lo demann
3309 18.001	44.00 mm	50.00 mm	104.00 mm	20.00 mm	18.00 mm	Lo demann
3309 3.000	10.00 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Lo demann
3309 18.000	38.00 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	Lo demann
3309 6.000	16.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Lo demann
3309 10.000	27.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Lo demann
3309 5.000	14.00 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Lo demann
3309 8.000	23.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Lo demann
3309 16.000	37.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Lo demann