← Katalog
Pas lo zimaz pour agrandi
3310
Al slot drill (2-fluted)
Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093673389, Cutting material: Solid carbide, Surface: bright, Type: W, Helix angle: 45, Back rake angle: 25, Length picto milling: short, Number of cutting edges range (from/to): 2, Type of machine interface: HA, Feed direction: with drilling
Spesifikasyon teknik
- EAN
- 4031093673389
- Type
- W
- Surface
- bright
- Designation
- Al slot drill (2-fluted)
- Helix angle
- 45
- Diameter range
- 3.000 mm – 20.000 mm
- Feed direction
- with drilling
- Back rake angle
- 25
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- short
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 2
Dimansyon ek kod komann
| Kod komann | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|---|---|
| 3310 12.000 | 21.00 mm | 45.00 mm | 73.00 mm | 12.00 mm | 12.00 mm | Lo demann | |
| 3310 16.000 | 27.00 mm | 48.00 mm | 82.00 mm | 16.00 mm | 16.00 mm | Lo demann | |
| 3310 4.000 | 8.00 mm | 36.00 mm | 54.00 mm | 6.00 mm | 4.00 mm | Lo demann | |
| 3310 6.000 | 13.00 mm | 36.00 mm | 54.00 mm | 6.00 mm | 6.00 mm | Lo demann | |
| 3310 20.000 | 34.00 mm | 50.00 mm | 92.00 mm | 20.00 mm | 20.00 mm | Lo demann | |
| 3310 3.000 | 7.00 mm | 36.00 mm | 50.00 mm | 6.00 mm | 3.00 mm | Lo demann | |
| 3310 14.000 | 24.00 mm | 45.00 mm | 75.00 mm | 14.00 mm | 14.00 mm | Lo demann | |
| 3310 10.000 | 19.00 mm | 40.00 mm | 66.00 mm | 10.00 mm | 10.00 mm | Lo demann | |
| 3310 5.000 | 10.00 mm | 36.00 mm | 54.00 mm | 6.00 mm | 5.00 mm | Lo demann | |
| 3310 8.000 | 16.00 mm | 36.00 mm | 58.00 mm | 8.00 mm | 8.00 mm | Lo demann | |
| 3310 18.000 | 30.00 mm | 48.00 mm | 84.00 mm | 18.00 mm | 18.00 mm | Lo demann |