Al slot drill XL (2-fluted)

Al slot drill XL (2-fluted). Designation: Al slot drill XL (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093365130, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: extra long, Number of cutting edges range (from/to): 2, Type of machine interface: HA, Feed direction: with drilling

Spesifikasyon teknik

EAN: 4031093365130
Type: N
Designation: Al slot drill XL (2-fluted)
Helix angle: 30
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: extra long
Type of machine interface: HA
Number of cutting edges range (from/to): 2

Dimansyon ek kod komann

Kod komann	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibilite
3021 18.000	82.00 mm	48.00 mm	150.00 mm	18.00 mm	18.00 mm	Lo demann
3021 5.000	35.50 mm	28.00 mm	75.00 mm	5.00 mm	5.00 mm	Lo demann
3021 18.001	82.00 mm	50.00 mm	150.00 mm	20.00 mm	18.00 mm	Lo demann
3021 20.000	84.00 mm	50.00 mm	150.00 mm	20.00 mm	20.00 mm	Lo demann
3021 3.000	24.00 mm	28.00 mm	75.00 mm	3.00 mm	3.00 mm	Lo demann
3021 8.000	48.00 mm	36.00 mm	100.00 mm	8.00 mm	8.00 mm	Lo demann
3021 14.000	59.00 mm	45.00 mm	150.00 mm	14.00 mm	14.00 mm	Lo demann
3021 4.000	29.50 mm	28.00 mm	75.00 mm	4.00 mm	4.00 mm	Lo demann
3021 6.000	37.00 mm	36.00 mm	75.00 mm	6.00 mm	6.00 mm	Lo demann
3021 14.001	79.00 mm	48.00 mm	150.00 mm	16.00 mm	14.00 mm	Lo demann
3021 12.000	58.00 mm	45.00 mm	150.00 mm	12.00 mm	12.00 mm	Lo demann
3021 10.000	50.00 mm	40.00 mm	100.00 mm	10.00 mm	10.00 mm	Lo demann
3021 16.000	81.00 mm	48.00 mm	150.00 mm	16.00 mm	16.00 mm	Lo demann