Al slot drill XL (2-fluted)

Al slot drill XL (2-fluted). Designation: Al slot drill XL (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093641562, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: extra long, Number of cutting edges range (from/to): 2, Type of machine interface: HA, Corner design: Schneidecke 90°, Feed direction: with drilling

Spesifikasyon teknik

EAN: 4031093641562
Type: N
Designation: Al slot drill XL (2-fluted)
Helix angle: 30
Corner design: Schneidecke 90°
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: extra long
Type of machine interface: HA
Number of cutting edges range (from/to): 2

Dimansyon ek kod komann

Kod komann	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibilite
5549 12.000	58.00 mm	45.00 mm	150.00 mm	12.00 mm	12.00 mm	Lo demann
5549 18.000	82.00 mm	48.00 mm	150.00 mm	18.00 mm	18.00 mm	Lo demann
5549 10.000	50.00 mm	40.00 mm	100.00 mm	10.00 mm	10.00 mm	Lo demann
5549 16.000	81.00 mm	48.00 mm	150.00 mm	16.00 mm	16.00 mm	Lo demann
5549 8.000	48.00 mm	36.00 mm	100.00 mm	8.00 mm	8.00 mm	Lo demann
5549 14.000	59.00 mm	45.00 mm	150.00 mm	14.00 mm	14.00 mm	Lo demann
5549 4.000	29.50 mm	28.00 mm	75.00 mm	4.00 mm	4.00 mm	Lo demann
5549 6.000	37.00 mm	36.00 mm	75.00 mm	6.00 mm	6.00 mm	Lo demann
5549 20.000	84.00 mm	50.00 mm	150.00 mm	20.00 mm	20.00 mm	Lo demann
5549 3.000	24.00 mm	28.00 mm	75.00 mm	3.00 mm	3.00 mm	Lo demann
5549 5.000	35.50 mm	28.00 mm	75.00 mm	5.00 mm	5.00 mm	Lo demann