← Katalog
Pas lo zimaz pour agrandi
3467
Ball nose slot drill (2-fluted)
Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 3.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093382014, Cutting material: M42, Surface: bright, Type: N, Helix angle: 30, Back rake angle: 11, Length picto milling: long, Number of cutting edges range (from/to): 2, Type of machine interface: B, Feed direction: with drilling
Spesifikasyon teknik
- EAN
- 4031093382014
- Type
- N
- Surface
- bright
- Designation
- Ball nose slot drill (2-fluted)
- Helix angle
- 30
- Diameter range
- 3.000 mm – 30.000 mm
- Feed direction
- with drilling
- Back rake angle
- 11
- Cutting material
- M42
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- B
- Number of cutting edges range (from/to)
- 2
Dimansyon ek kod komann
| Kod komann | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|---|---|
| 3467 10.000 | 37.00 mm | 40.00 mm | 95.00 mm | 10.00 mm | 10.00 mm | Lo demann | |
| 3467 3.000 | 13.00 mm | 36.00 mm | 56.00 mm | 6.00 mm | 3.00 mm | Lo demann | |
| 3467 24.000 | 76.00 mm | 56.00 mm | 166.00 mm | 25.00 mm | 24.00 mm | Lo demann | |
| 3467 5.000 | 21.00 mm | 36.00 mm | 68.00 mm | 6.00 mm | 5.00 mm | Lo demann | |
| 3467 18.000 | 52.00 mm | 48.00 mm | 123.00 mm | 16.00 mm | 18.00 mm | Lo demann | |
| 3467 7.000 | 27.00 mm | 40.00 mm | 80.00 mm | 10.00 mm | 7.00 mm | Lo demann | |
| 3467 14.000 | 44.00 mm | 45.00 mm | 110.00 mm | 12.00 mm | 14.00 mm | Lo demann | |
| 3467 4.000 | 18.00 mm | 36.00 mm | 63.00 mm | 6.00 mm | 4.00 mm | Lo demann | |
| 3467 8.000 | 32.00 mm | 40.00 mm | 88.00 mm | 10.00 mm | 8.00 mm | Lo demann | |
| 3467 20.000 | 63.00 mm | 50.00 mm | 141.00 mm | 20.00 mm | 20.00 mm | Lo demann | |
| 3467 6.000 | 21.00 mm | 36.00 mm | 68.00 mm | 6.00 mm | 6.00 mm | Lo demann | |
| 3467 16.000 | 52.00 mm | 48.00 mm | 123.00 mm | 16.00 mm | 16.00 mm | Lo demann | |
| 3467 12.000 | 44.00 mm | 45.00 mm | 110.00 mm | 12.00 mm | 12.00 mm | Lo demann |