← Katalog
Pas lo zimaz pour agrandi
25109
Cutting insert for back boring and profiling
Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"full"}], EAN: 4049844183957, Cutting material: Solid carbide, Surface: nanoA
Spesifikasyon teknik
- EAN
- 4049844183957
- Surface
- nanoA
- Designation
- Cutting insert for back boring and profiling
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"full"}]
Dimansyon ek kod komann
| Kod komann | Total length | Shank diameter | Disponibilite | Demann pri |
|---|---|---|---|---|
| 25109 4.020 | 40.00 mm | 4.00 mm | Lo demann | |
| 25109 4.019 | 35.00 mm | 4.00 mm | Lo demann | |
| 25109 4.002 | 25.00 mm | 4.00 mm | Lo demann | |
| 25109 4.016 | 45.00 mm | 4.00 mm | Lo demann | |
| 25109 4.022 | 50.00 mm | 4.00 mm | Lo demann | |
| 25109 4.003 | 30.00 mm | 4.00 mm | Lo demann | |
| 25109 4.010 | 30.00 mm | 4.00 mm | Lo demann | |
| 25109 4.006 | 30.00 mm | 4.00 mm | Lo demann | |
| 25109 4.011 | 35.00 mm | 4.00 mm | Lo demann | |
| 25109 4.009 | 25.00 mm | 4.00 mm | Lo demann | |
| 25109 4.008 | 40.00 mm | 4.00 mm | Lo demann | |
| 25109 4.005 | 25.00 mm | 4.00 mm | Lo demann | |
| 25109 4.015 | 40.00 mm | 4.00 mm | Lo demann | |
| 25109 4.001 | 25.00 mm | 4.00 mm | Lo demann | |
| 25109 4.021 | 45.00 mm | 4.00 mm | Lo demann | |
| 25109 4.012 | 40.00 mm | 4.00 mm | Lo demann | |
| 25109 4.007 | 35.00 mm | 4.00 mm | Lo demann | |
| 25109 4.014 | 35.00 mm | 4.00 mm | Lo demann | |
| 25109 4.018 | 30.00 mm | 4.00 mm | Lo demann | |
| 25109 4.017 | 50.00 mm | 4.00 mm | Lo demann | |
| 25109 4.013 | 30.00 mm | 4.00 mm | Lo demann | |
| 25109 4.004 | 35.00 mm | 4.00 mm | Lo demann |