← Katalog
Pas lo zimaz pour agrandi
27231
Cutting insert for internal grooving, full radius slots
Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844302426, Cutting material: Solid carbide, Surface: bright
Spesifikasyon teknik
- EAN
- 4049844302426
- Surface
- bright
- Designation
- Cutting insert for internal grooving, full radius slots
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Dimansyon ek kod komann
| Kod komann | Total length | Shank diameter | Disponibilite | Demann pri |
|---|---|---|---|---|
| 27231 8.340 | 67.00 mm | 8.00 mm | Lo demann | |
| 27231 8.250 | 72.00 mm | 8.00 mm | Lo demann | |
| 27231 8.220 | 52.00 mm | 8.00 mm | Lo demann | |
| 27231 8.350 | 72.00 mm | 8.00 mm | Lo demann | |
| 27231 8.020 | 52.00 mm | 8.00 mm | Lo demann | |
| 27231 8.240 | 67.00 mm | 8.00 mm | Lo demann | |
| 27231 8.210 | 42.00 mm | 8.00 mm | Lo demann | |
| 27231 8.130 | 62.00 mm | 8.00 mm | Lo demann | |
| 27231 8.310 | 42.00 mm | 8.00 mm | Lo demann | |
| 27231 8.110 | 42.00 mm | 8.00 mm | Lo demann | |
| 27231 8.320 | 52.00 mm | 8.00 mm | Lo demann | |
| 27231 8.150 | 72.00 mm | 8.00 mm | Lo demann | |
| 27231 8.120 | 52.00 mm | 8.00 mm | Lo demann | |
| 27231 8.040 | 67.00 mm | 8.00 mm | Lo demann | |
| 27231 8.030 | 62.00 mm | 8.00 mm | Lo demann | |
| 27231 8.140 | 67.00 mm | 8.00 mm | Lo demann | |
| 27231 8.230 | 62.00 mm | 8.00 mm | Lo demann | |
| 27231 8.050 | 72.00 mm | 8.00 mm | Lo demann | |
| 27231 8.010 | 42.00 mm | 8.00 mm | Lo demann | |
| 27231 8.330 | 62.00 mm | 8.00 mm | Lo demann |