← Katalog
Pas lo zimaz pour agrandi
25750
Cutting insert for internal grooving, straight slots
Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"full"}], EAN: 4049844214149, Cutting material: Solid carbide, Surface: nanoA
Spesifikasyon teknik
- EAN
- 4049844214149
- Surface
- nanoA
- Designation
- Cutting insert for internal grooving, straight slots
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"full"}]
Dimansyon ek kod komann
| Kod komann | Total length | Shank diameter | Disponibilite | Demann pri |
|---|---|---|---|---|
| 25750 6.005 | 57.00 mm | 6.00 mm | Lo demann | |
| 25750 6.011 | 52.00 mm | 6.00 mm | Lo demann | |
| 25750 6.020 | 62.00 mm | 6.00 mm | Lo demann | |
| 25750 6.012 | 57.00 mm | 6.00 mm | Lo demann | |
| 25750 6.010 | 47.00 mm | 6.00 mm | Lo demann | |
| 25750 6.004 | 52.00 mm | 6.00 mm | Lo demann | |
| 25750 6.014 | 67.00 mm | 6.00 mm | Lo demann | |
| 25750 6.021 | 67.00 mm | 6.00 mm | Lo demann | |
| 25750 6.006 | 62.00 mm | 6.00 mm | Lo demann | |
| 25750 6.016 | 42.00 mm | 6.00 mm | Lo demann | |
| 25750 6.001 | 37.00 mm | 6.00 mm | Lo demann | |
| 25750 6.013 | 62.00 mm | 6.00 mm | Lo demann | |
| 25750 6.015 | 37.00 mm | 6.00 mm | Lo demann | |
| 25750 6.019 | 57.00 mm | 6.00 mm | Lo demann | |
| 25750 6.007 | 67.00 mm | 6.00 mm | Lo demann | |
| 25750 6.002 | 42.00 mm | 6.00 mm | Lo demann | |
| 25750 6.018 | 52.00 mm | 6.00 mm | Lo demann | |
| 25750 6.003 | 47.00 mm | 6.00 mm | Lo demann | |
| 25750 6.008 | — | — | Lo demann | |
| 25750 6.017 | — | — | Lo demann | |
| 25750 6.009 | — | — | Lo demann |