← Katalog
Pas lo zimaz pour agrandi
27124
Cutting insert for internal grooving, straight slots
Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"full"}], EAN: 4049844307520, Cutting material: Solid carbide, Surface: nanoA
Spesifikasyon teknik
- EAN
- 4049844307520
- Surface
- nanoA
- Designation
- Cutting insert for internal grooving, straight slots
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"full"}]
Dimansyon ek kod komann
| Kod komann | Total length | Shank diameter | Disponibilite | Demann pri |
|---|---|---|---|---|
| 27124 8.010 | 42.00 mm | 8.00 mm | Lo demann | |
| 27124 8.320 | 52.00 mm | 8.00 mm | Lo demann | |
| 27124 8.150 | 72.00 mm | 8.00 mm | Lo demann | |
| 27124 8.050 | 72.00 mm | 8.00 mm | Lo demann | |
| 27124 8.130 | 62.00 mm | 8.00 mm | Lo demann | |
| 27124 8.120 | 52.00 mm | 8.00 mm | Lo demann | |
| 27124 8.250 | 72.00 mm | 8.00 mm | Lo demann | |
| 27124 8.220 | 52.00 mm | 8.00 mm | Lo demann | |
| 27124 8.140 | 67.00 mm | 8.00 mm | Lo demann | |
| 27124 8.240 | 67.00 mm | 8.00 mm | Lo demann | |
| 27124 8.110 | 42.00 mm | 8.00 mm | Lo demann | |
| 27124 8.340 | 67.00 mm | 8.00 mm | Lo demann | |
| 27124 8.040 | 67.00 mm | 8.00 mm | Lo demann | |
| 27124 8.230 | 62.00 mm | 8.00 mm | Lo demann | |
| 27124 8.020 | 52.00 mm | 8.00 mm | Lo demann | |
| 27124 8.310 | 42.00 mm | 8.00 mm | Lo demann | |
| 27124 8.350 | 72.00 mm | 8.00 mm | Lo demann | |
| 27124 8.210 | 42.00 mm | 8.00 mm | Lo demann | |
| 27124 8.030 | — | — | Lo demann | |
| 27124 8.330 | 62.00 mm | 8.00 mm | Lo demann |