← Katalog
Pas lo zimaz pour agrandi
19961
End mill (4-fluted)
End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844232112, Cutting material: Solid carbide, Surface: TiAlN, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: Cyl, Corner design: Schneidecke 90°
Spesifikasyon teknik
- EAN
- 4049844232112
- Type
- N
- Surface
- TiAlN
- Designation
- End mill (4-fluted)
- Helix angle
- 30
- Corner design
- Schneidecke 90°
- Diameter range
- 2.000 mm – 20.000 mm
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
- Length picto milling
- long
- Type of machine interface
- Cyl
- Number of cutting edges range (from/to)
- 4
Dimansyon ek kod komann
| Kod komann | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|---|---|
| 19961 20.000 | 58.40 mm | 46.00 mm | 100.00 mm | 20.00 mm | 20.00 mm | Lo demann | |
| 19961 3.000 | 11.00 mm | 30.00 mm | 45.00 mm | 6.00 mm | 3.00 mm | Lo demann | |
| 19961 10.000 | 32.00 mm | 40.00 mm | 70.00 mm | 10.00 mm | 10.00 mm | Lo demann | |
| 19961 4.000 | 15.00 mm | 28.00 mm | 45.00 mm | 6.00 mm | 4.00 mm | Lo demann | |
| 19961 8.000 | 27.00 mm | 34.50 mm | 60.00 mm | 8.00 mm | 8.00 mm | Lo demann | |
| 19961 12.000 | 37.04 mm | 39.00 mm | 75.00 mm | 12.00 mm | 12.00 mm | Lo demann | |
| 19961 2.000 | 8.00 mm | 30.00 mm | 40.00 mm | 4.00 mm | 2.00 mm | Lo demann | |
| 19961 6.000 | 19.00 mm | 31.00 mm | 50.00 mm | 6.00 mm | 6.00 mm | Lo demann | |
| 19961 16.000 | 46.72 mm | 31.00 mm | 75.00 mm | 16.00 mm | 16.00 mm | Lo demann | |
| 19961 5.000 | 18.00 mm | 30.00 mm | 50.00 mm | 6.00 mm | 5.00 mm | Lo demann |