← Katalog
Pas lo zimaz pour agrandi
3197
End mill (4-fluted)
End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093671729, Cutting material: Solid carbide, Surface: bright, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Feed direction: with drilling
Spesifikasyon teknik
- EAN
- 4031093671729
- Type
- N
- Surface
- bright
- Designation
- End mill (4-fluted)
- Helix angle
- 30
- Diameter range
- 2.000 mm – 20.000 mm
- Feed direction
- with drilling
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 4
Dimansyon ek kod komann
| Kod komann | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|---|---|
| 3197 3.500 | 13.50 mm | 36.00 mm | 57.00 mm | 6.00 mm | 3.50 mm | Lo demann | |
| 3197 14.000 | 38.88 mm | 45.00 mm | 83.00 mm | 14.00 mm | 14.00 mm | Lo demann | |
| 3197 18.001 | 54.56 mm | 50.00 mm | 104.00 mm | 20.00 mm | 18.00 mm | Lo demann | |
| 3197 9.000 | 28.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 9.00 mm | Lo demann | |
| 3197 2.000 | 9.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 2.00 mm | Lo demann | |
| 3197 7.000 | 23.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 7.00 mm | Lo demann | |
| 3197 5.000 | 18.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.00 mm | Lo demann | |
| 3197 8.000 | 27.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Lo demann | |
| 3197 20.000 | 56.40 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | Lo demann | |
| 3197 16.000 | 46.72 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Lo demann | |
| 3197 14.001 | 44.88 mm | 48.00 mm | 92.00 mm | 16.00 mm | 14.00 mm | Lo demann | |
| 3197 10.000 | 32.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Lo demann | |
| 3197 6.000 | 19.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | Lo demann | |
| 3197 4.000 | 15.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 4.00 mm | Lo demann | |
| 3197 4.500 | 15.50 mm | 36.00 mm | 57.00 mm | 6.00 mm | 4.50 mm | Lo demann | |
| 3197 18.000 | 48.56 mm | 48.00 mm | 92.00 mm | 18.00 mm | 18.00 mm | Lo demann | |
| 3197 12.000 | 37.04 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Lo demann | |
| 3197 3.000 | 11.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 3.00 mm | Lo demann |