← Katalog
Pas lo zimaz pour agrandi
8136
End mill (single-fluted)
End mill (single-fluted). Designation: End mill (single-fluted), Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844767492, Cutting material: Solid carbide, Helix angle: 25, Back rake angle: 20, Length picto milling: long, Number of cutting edges range (from/to): 1, Type of machine interface: ~HA/HA, Feed direction: with drilling
Spesifikasyon teknik
- EAN
- 4049844767492
- Designation
- End mill (single-fluted)
- Helix angle
- 25
- Diameter range
- 1.000 mm – 10.000 mm
- Feed direction
- with drilling
- Back rake angle
- 20
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- ~HA/HA
- Number of cutting edges range (from/to)
- 1
Dimansyon ek kod komann
| Kod komann | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|---|---|
| 8136 5.000 | 20.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.00 mm | Lo demann | |
| 8136 8.000 | 27.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Lo demann | |
| 8136 10.000 | 31.00 mm | 40.00 mm | 73.00 mm | 10.00 mm | 10.00 mm | Lo demann | |
| 8136 1.000 | 6.50 mm | 36.00 mm | 50.00 mm | 6.00 mm | 1.00 mm | Lo demann | |
| 8136 6.000 | 24.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | Lo demann | |
| 8136 4.000 | 17.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 4.00 mm | Lo demann | |
| 8136 2.000 | 13.00 mm | 38.00 mm | 57.00 mm | 6.00 mm | 2.00 mm | Lo demann | |
| 8136 3.000 | 15.00 mm | 38.00 mm | 57.00 mm | 6.00 mm | 3.00 mm | Lo demann | |
| 8136 1.500 | 9.00 mm | 34.94 mm | 50.00 mm | 6.00 mm | 1.50 mm | Lo demann |