← Katalog
Pas lo zimaz pour agrandi
525
Extra length twist drill, series 1
Extra length twist drill, series 1. Designation: Extra length twist drill, series 1, Diameter range: 7.900 mm – 33.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093154529, Cutting material: HSS, Surface: bright, Product family: GT 50, Drilling depth: ~15xD, Standard: DIN 1870K, Point angle: 130, Tolerance class nominal diameter: h8, Cutting direction: Right-hand, Type of machine interface: MK
Spesifikasyon teknik
- EAN
- 4031093154529
- Surface
- bright
- Standard
- DIN 1870K
- Designation
- Extra length twist drill, series 1
- Point angle
- 130
- Diameter range
- 7.900 mm – 33.000 mm
- Drilling depth
- ~15xD
- Product family
- GT 50
- Cutting material
- HSS
- Cutting direction
- Right-hand
- TABLE_INFO_PASSON
- [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Type of machine interface
- MK
- Tolerance class nominal diameter
- h8
Dimansyon ek kod komann
| Kod komann | Flute length | Total length | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|
| 525 12.800 | 205.00 mm | 310.00 mm | 12.80 mm | Lo demann | |
| 525 15.000 | 220.00 mm | 340.00 mm | 15.00 mm | Lo demann | |
| 525 31.000 | 320.00 mm | 480.00 mm | 31.00 mm | Lo demann | |
| 525 12.000 | 205.00 mm | 310.00 mm | 12.00 mm | Lo demann | |
| 525 8.500 | 165.00 mm | 265.00 mm | 8.50 mm | Lo demann | |
| 525 9.000 | 175.00 mm | 275.00 mm | 9.00 mm | Lo demann | |
| 525 8.700 | 175.00 mm | 275.00 mm | 8.70 mm | Lo demann | |
| 525 13.000 | 205.00 mm | 310.00 mm | 13.00 mm | Lo demann | |
| 525 24.380 | 290.00 mm | 440.00 mm | 24.38 mm | Lo demann | |
| 525 10.000 | 185.00 mm | 285.00 mm | 10.00 mm | Lo demann | |
| 525 21.000 | 260.00 mm | 385.00 mm | 21.00 mm | Lo demann | |
| 525 10.500 | 185.00 mm | 285.00 mm | 10.50 mm | Lo demann | |
| 525 9.500 | 175.00 mm | 275.00 mm | 9.50 mm | Lo demann | |
| 525 14.000 | 220.00 mm | 325.00 mm | 14.00 mm | Lo demann | |
| 525 13.500 | 220.00 mm | 325.00 mm | 13.50 mm | Lo demann | |
| 525 12.500 | 205.00 mm | 310.00 mm | 12.50 mm | Lo demann | |
| 525 26.500 | 290.00 mm | 440.00 mm | 26.50 mm | Lo demann | |
| 525 15.500 | 230.00 mm | 355.00 mm | 15.50 mm | Lo demann | |
| 525 16.000 | 230.00 mm | 355.00 mm | 16.00 mm | Lo demann | |
| 525 18.000 | 245.00 mm | 370.00 mm | 18.00 mm | Lo demann | |
| 525 23.000 | 270.00 mm | 405.00 mm | 23.00 mm | Lo demann | |
| 525 24.300 | 290.00 mm | 440.00 mm | 24.30 mm | Lo demann |