HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844216754, Cutting material: Solid carbide, Type: N, Helix angle: 35/38, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Feed direction: with drilling

Spesifikasyon teknik

EAN: 4049844216754
Type: N
Designation: HPC end mills (4-fluted)
Helix angle: 35/38
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 4

Dimansyon ek kod komann

Kod komann	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibilite
19980 6.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Lo demann
19980 10.000	28.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Lo demann
19980 3.000	10.50 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Lo demann
19980 16.000	42.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Lo demann
19980 20.000	50.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Lo demann
19980 12.000	34.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Lo demann
19980 14.000	35.00 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Lo demann
19980 5.000	16.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Lo demann
19980 4.000	14.00 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Lo demann
19980 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Lo demann