← Katalog
Pas lo zimaz pour agrandi
1410
Machine reamer
Machine reamer. Designation: Machine reamer, Diameter range: 5.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4031093505093, Cutting material: Carbide-tipped, Surface: bright, Standard: ~DIN 8094, Tolerance class hole: H7, Cutting direction: Right-hand, Type of machine interface: MK, Hole type: Blind hole
Spesifikasyon teknik
- EAN
- 4031093505093
- Surface
- bright
- Standard
- ~DIN 8094
- Hole type
- Blind hole
- Designation
- Machine reamer
- Diameter range
- 5.000 mm – 40.000 mm
- Cutting material
- Carbide-tipped
- Cutting direction
- Right-hand
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
- Tolerance class hole
- H7
- Type of machine interface
- MK
Dimansyon ek kod komann
| Kod komann | Flute length | Total length | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|
| 1410 7.000 | 40.00 mm | 150.00 mm | 7.00 mm | Lo demann | |
| 1410 5.000 | 32.00 mm | 133.00 mm | 5.00 mm | Lo demann | |
| 1410 9.000 | — | 162.00 mm | 9.00 mm | Lo demann | |
| 1410 6.000 | 35.00 mm | 138.00 mm | 6.00 mm | Lo demann | |
| 1410 8.000 | 42.00 mm | 156.00 mm | 8.00 mm | Lo demann | |
| 1410 21.000 | — | 232.00 mm | 21.00 mm | Lo demann | |
| 1410 16.000 | — | 210.00 mm | 16.00 mm | Lo demann | |
| 1410 40.000 | — | 329.00 mm | 40.00 mm | Lo demann | |
| 1410 26.000 | — | 273.00 mm | 26.00 mm | Lo demann | |
| 1410 17.000 | — | 214.00 mm | 17.00 mm | Lo demann | |
| 1410 23.000 | — | 241.00 mm | 23.00 mm | Lo demann | |
| 1410 28.000 | — | 277.00 mm | 28.00 mm | Lo demann | |
| 1410 24.000 | — | 268.00 mm | 24.00 mm | Lo demann | |
| 1410 12.000 | — | 182.00 mm | 12.00 mm | Lo demann | |
| 1410 20.000 | — | 228.00 mm | 20.00 mm | Lo demann | |
| 1410 15.000 | — | 204.00 mm | 15.00 mm | Lo demann | |
| 1410 13.000 | — | 182.00 mm | 13.00 mm | Lo demann | |
| 1410 10.000 | — | 168.00 mm | 10.00 mm | Lo demann | |
| 1410 11.000 | — | 175.00 mm | 11.00 mm | Lo demann | |
| 1410 18.000 | — | 219.00 mm | 18.00 mm | Lo demann | |
| 1410 27.000 | — | 277.00 mm | 27.00 mm | Lo demann | |
| 1410 14.000 | — | 189.00 mm | 14.00 mm | Lo demann | |
| 1410 22.000 | — | 237.00 mm | 22.00 mm | Lo demann | |
| 1410 25.000 | — | 268.00 mm | 25.00 mm | Lo demann |