← Katalog
Pas lo zimaz pour agrandi
1430
Machine reamer
Machine reamer. Designation: Machine reamer, Diameter range: 3.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4031093699020, Cutting material: Carbide-tipped, Surface: nanoA, Standard: ~DIN 8090, Tolerance class hole: H7, Cutting direction: Right-hand, Hole type: Blind hole
Spesifikasyon teknik
- EAN
- 4031093699020
- Surface
- nanoA
- Standard
- ~DIN 8090
- Hole type
- Blind hole
- Designation
- Machine reamer
- Diameter range
- 3.000 mm – 14.000 mm
- Cutting material
- Carbide-tipped
- Cutting direction
- Right-hand
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
- Tolerance class hole
- H7
Dimansyon ek kod komann
| Kod komann | Flute length | Total length | Shank diameter | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|---|
| 1430 4.500 | 31.00 mm | 63.00 mm | 4.00 mm | 4.50 mm | Lo demann | |
| 1430 7.000 | 34.00 mm | 71.00 mm | 6.30 mm | 7.00 mm | Lo demann | |
| 1430 3.500 | 29.00 mm | 56.00 mm | 3.00 mm | 3.50 mm | Lo demann | |
| 1430 8.500 | 36.00 mm | 71.00 mm | 6.30 mm | 8.50 mm | Lo demann | |
| 1430 5.500 | 31.00 mm | 63.00 mm | 5.00 mm | 5.50 mm | Lo demann | |
| 1430 6.500 | 31.00 mm | 63.00 mm | 5.00 mm | 6.50 mm | Lo demann | |
| 1430 9.500 | 36.00 mm | 71.00 mm | 8.00 mm | 9.50 mm | Lo demann | |
| 1430 4.000 | 29.00 mm | 56.00 mm | 3.55 mm | 4.00 mm | Lo demann | |
| 1430 3.000 | 29.00 mm | 56.00 mm | 2.50 mm | 3.00 mm | Lo demann | |
| 1430 6.000 | 31.00 mm | 63.00 mm | 5.00 mm | 6.00 mm | Lo demann | |
| 1430 7.500 | 34.00 mm | 71.00 mm | 6.30 mm | 7.50 mm | Lo demann | |
| 1430 8.000 | 34.00 mm | 71.00 mm | 6.30 mm | 8.00 mm | Lo demann | |
| 1430 5.000 | 31.00 mm | 63.00 mm | 4.00 mm | 5.00 mm | Lo demann | |
| 1430 9.000 | 36.00 mm | 71.00 mm | 8.00 mm | 9.00 mm | Lo demann | |
| 1430 12.500 | 42.00 mm | 80.00 mm | 10.00 mm | 12.50 mm | Lo demann | |
| 1430 11.000 | 42.00 mm | 80.00 mm | 10.00 mm | 11.00 mm | Lo demann | |
| 1430 10.000 | 36.00 mm | 71.00 mm | 8.00 mm | 10.00 mm | Lo demann | |
| 1430 12.000 | 42.00 mm | 80.00 mm | 10.00 mm | 12.00 mm | Lo demann | |
| 1430 14.000 | 46.00 mm | 90.00 mm | 12.50 mm | 14.00 mm | Lo demann | |
| 1430 13.500 | 46.00 mm | 90.00 mm | 12.50 mm | 13.50 mm | Lo demann | |
| 1430 10.500 | 36.00 mm | 71.00 mm | 8.00 mm | 10.50 mm | Lo demann |