← Katalog
Pas lo zimaz pour agrandi
719
Machine reamer
Machine reamer. Designation: Machine reamer, Diameter range: 5.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4031093236034, Cutting material: Carbide-tipped, Surface: bright, Standard: ~DIN 8051, Tolerance class hole: H7, Cutting direction: Right-hand, Type of machine interface: MK, Hole type: Blind hole
Spesifikasyon teknik
- EAN
- 4031093236034
- Surface
- bright
- Standard
- ~DIN 8051
- Hole type
- Blind hole
- Designation
- Machine reamer
- Diameter range
- 5.000 mm – 40.000 mm
- Cutting material
- Carbide-tipped
- Cutting direction
- Right-hand
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
- Tolerance class hole
- H7
- Type of machine interface
- MK
Dimansyon ek kod komann
| Kod komann | Flute length | Total length | Nominal diameter | Shank length | Disponibilite | Demann pri |
|---|---|---|---|---|---|---|
| 719 8.000 | 25.00 mm | 156.00 mm | 8.00 mm | — | Lo demann | |
| 719 9.000 | 37.00 mm | 162.00 mm | 9.00 mm | 15.00 mm | Lo demann | |
| 719 5.000 | 21.00 mm | 133.00 mm | 5.00 mm | — | Lo demann | |
| 719 6.000 | 21.00 mm | 138.00 mm | 6.00 mm | — | Lo demann | |
| 719 7.000 | 25.00 mm | 150.00 mm | 7.00 mm | — | Lo demann | |
| 719 23.000 | — | 241.00 mm | 23.00 mm | — | Lo demann | |
| 719 28.000 | — | 277.00 mm | 28.00 mm | — | Lo demann | |
| 719 12.000 | — | 182.00 mm | 12.00 mm | — | Lo demann | |
| 719 40.000 | — | 329.00 mm | 40.00 mm | — | Lo demann | |
| 719 30.000 | — | 281.00 mm | 30.00 mm | — | Lo demann | |
| 719 32.000 | — | 317.00 mm | 32.00 mm | — | Lo demann | |
| 719 16.000 | — | 210.00 mm | 16.00 mm | — | Lo demann | |
| 719 21.000 | — | 232.00 mm | 21.00 mm | — | Lo demann | |
| 719 10.000 | — | 168.00 mm | 10.00 mm | — | Lo demann | |
| 719 20.000 | — | 228.00 mm | 20.00 mm | — | Lo demann | |
| 719 11.000 | — | 175.00 mm | 11.00 mm | — | Lo demann | |
| 719 22.000 | — | 237.00 mm | 22.00 mm | — | Lo demann | |
| 719 26.000 | — | 273.00 mm | 26.00 mm | — | Lo demann | |
| 719 24.000 | — | 268.00 mm | 24.00 mm | — | Lo demann | |
| 719 14.000 | — | 189.00 mm | 14.00 mm | — | Lo demann | |
| 719 15.000 | — | 204.00 mm | 15.00 mm | — | Lo demann | |
| 719 17.000 | — | 214.00 mm | 17.00 mm | — | Lo demann | |
| 719 13.000 | — | 182.00 mm | 13.00 mm | — | Lo demann | |
| 719 18.000 | — | 219.00 mm | 18.00 mm | — | Lo demann | |
| 719 25.000 | — | 268.00 mm | 25.00 mm | — | Lo demann |