← Katalog
Pas lo zimaz pour agrandi
6550
Micro HPC milling cutter
Micro HPC milling cutter. Designation: Micro HPC milling cutter, Diameter range: 0.300 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"partial"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844739307, Indicator new/addition: New, Cutting material: Solid carbide, Surface: Perrox, Type: N, Helix angle: 30, Back rake angle: 4, Length picto milling: short, Number of cutting edges range (from/to): 3, Type of machine interface: HA, Feed direction: with drilling
Spesifikasyon teknik
- EAN
- 4049844739307
- Type
- N
- Surface
- Perrox
- Designation
- Micro HPC milling cutter
- Helix angle
- 30
- Diameter range
- 0.300 mm – 16.000 mm
- Feed direction
- with drilling
- Back rake angle
- 4
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"partial"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
- Length picto milling
- short
- Indicator new/addition
- New
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 3
Dimansyon ek kod komann
| Kod komann | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|---|---|
| 6550 2.000 | 4.70 mm | 28.00 mm | 38.00 mm | 3.00 mm | 2.00 mm | Lo demann | |
| 6550 0.300 | 0.84 mm | 28.00 mm | 38.00 mm | 3.00 mm | 0.30 mm | Lo demann | |
| 6550 4.000 | 9.00 mm | 36.00 mm | 50.00 mm | 6.00 mm | 4.00 mm | Lo demann | |
| 6550 2.800 | 6.58 mm | 28.00 mm | 38.00 mm | 3.00 mm | 2.80 mm | Lo demann | |
| 6550 0.800 | 1.90 mm | 28.00 mm | 38.00 mm | 3.00 mm | 0.80 mm | Lo demann | |
| 6550 0.600 | 1.43 mm | 28.00 mm | 38.00 mm | 3.00 mm | 0.60 mm | Lo demann | |
| 6550 1.000 | 2.38 mm | 28.00 mm | 38.00 mm | 3.00 mm | 1.00 mm | Lo demann | |
| 6550 0.400 | 0.95 mm | 28.00 mm | 38.00 mm | 3.00 mm | 0.40 mm | Lo demann | |
| 6550 2.500 | 5.88 mm | 28.00 mm | 38.00 mm | 3.00 mm | 2.50 mm | Lo demann | |
| 6550 0.700 | 1.67 mm | 28.00 mm | 38.00 mm | 3.00 mm | 0.70 mm | Lo demann | |
| 6550 1.200 | 2.82 mm | 28.00 mm | 38.00 mm | 3.00 mm | 1.20 mm | Lo demann | |
| 6550 0.390 | 0.93 mm | 28.00 mm | 38.00 mm | 3.00 mm | 0.39 mm | Lo demann | |
| 6550 1.500 | 3.52 mm | 28.00 mm | 38.00 mm | 3.00 mm | 1.50 mm | Lo demann | |
| 6550 1.800 | 4.23 mm | 28.00 mm | 38.00 mm | 3.00 mm | 1.80 mm | Lo demann | |
| 6550 0.500 | 1.19 mm | 28.00 mm | 38.00 mm | 3.00 mm | 0.50 mm | Lo demann | |
| 6550 3.000 | 7.05 mm | 28.00 mm | 38.00 mm | 3.00 mm | 3.00 mm | Lo demann | |
| 6550 3.001 | 7.05 mm | 36.00 mm | 50.00 mm | 6.00 mm | 3.00 mm | Lo demann | |
| 6550 8.000 | 19.00 mm | 34.40 mm | 55.00 mm | 8.00 mm | 8.00 mm | Lo demann | |
| 6550 5.000 | 11.50 mm | 35.90 mm | 50.00 mm | 6.00 mm | 5.00 mm | Lo demann | |
| 6550 10.000 | 23.00 mm | 35.10 mm | 61.00 mm | 10.00 mm | 10.00 mm | Lo demann | |
| 6550 6.000 | 15.00 mm | 33.40 mm | 50.00 mm | 6.00 mm | 6.00 mm | Lo demann | |
| 6550 12.000 | 27.00 mm | 39.10 mm | 70.00 mm | 12.00 mm | 12.00 mm | Lo demann | |
| 6550 16.000 | 35.00 mm | 41.10 mm | 82.00 mm | 16.00 mm | 16.00 mm | Lo demann | |
| 6550 2.780 | 6.53 mm | 28.00 mm | 38.00 mm | 3.00 mm | 2.78 mm | Lo demann | |
| 6550 2.380 | 5.59 mm | 28.00 mm | 38.00 mm | 3.00 mm | 2.38 mm | Lo demann | |
| 6550 3.175 | 7.46 mm | 36.00 mm | 50.00 mm | 6.00 mm | 3.17 mm | Lo demann | |
| 6550 1.980 | 4.65 mm | 28.00 mm | 38.00 mm | 3.00 mm | 1.98 mm | Lo demann | |
| 6550 1.190 | 2.80 mm | 28.00 mm | 38.00 mm | 3.00 mm | 1.19 mm | Lo demann | |
| 6550 0.790 | 1.88 mm | 28.00 mm | 38.00 mm | 3.00 mm | 0.79 mm | Lo demann | |
| 6550 1.590 | 3.74 mm | 28.00 mm | 38.00 mm | 3.00 mm | 1.59 mm | Lo demann |