← Katalog
Pas lo zimaz pour agrandi
3142
Mini slot drill (3-fluted)
Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093635967, Cutting material: M42, Surface: bright, Type: N, Helix angle: 30, Back rake angle: 11, Length picto milling: short, Number of cutting edges range (from/to): 3, Corner design: Schneidecke 90°, Feed direction: with drilling
Spesifikasyon teknik
- EAN
- 4031093635967
- Type
- N
- Surface
- bright
- Designation
- Mini slot drill (3-fluted)
- Helix angle
- 30
- Corner design
- Schneidecke 90°
- Diameter range
- 3.000 mm – 10.000 mm
- Feed direction
- with drilling
- Back rake angle
- 11
- Cutting material
- M42
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- short
- Number of cutting edges range (from/to)
- 3
Dimansyon ek kod komann
| Kod komann | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|---|---|
| 3142 5.000 | 10.00 mm | 24.00 mm | 39.00 mm | 6.00 mm | 5.00 mm | Lo demann | |
| 3142 6.000 | 10.00 mm | 24.00 mm | 39.00 mm | 6.00 mm | 6.00 mm | Lo demann | |
| 3142 10.000 | 17.00 mm | 27.00 mm | 50.00 mm | 10.00 mm | 10.00 mm | Lo demann | |
| 3142 3.000 | 7.00 mm | 24.00 mm | 36.00 mm | 6.00 mm | 3.00 mm | Lo demann | |
| 3142 8.000 | 14.00 mm | 24.00 mm | 43.00 mm | 8.00 mm | 8.00 mm | Lo demann | |
| 3142 4.000 | 9.00 mm | 24.00 mm | 38.00 mm | 6.00 mm | 4.00 mm | Lo demann |