← Katalog
Pas lo zimaz pour agrandi
520
Morse taper shank subland drill
Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 9.400 mm – 33.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093153317, Cutting material: HSS, Surface: steam tempered, Type: N, Standard: Company std., Point angle: 118, Tolerance class nominal diameter: h8, Cutting direction: Right-hand, Type of machine interface: MK
Spesifikasyon teknik
- EAN
- 4031093153317
- Type
- N
- Surface
- steam tempered
- Standard
- Company std.
- Designation
- Morse taper shank subland drill
- Point angle
- 118
- Diameter range
- 9.400 mm – 33.000 mm
- Cutting material
- HSS
- Cutting direction
- Right-hand
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Type of machine interface
- MK
- Tolerance class nominal diameter
- h8
Dimansyon ek kod komann
| Kod komann | Flute length | Total length | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|
| 520 31.000 | 180.00 mm | 301.00 mm | 31.00 mm | Lo demann | |
| 520 29.000 | 175.00 mm | 296.00 mm | 29.00 mm | Lo demann | |
| 520 16.500 | 125.00 mm | 223.00 mm | 16.50 mm | Lo demann | |
| 520 33.000 | 185.00 mm | 334.00 mm | 33.00 mm | Lo demann | |
| 520 14.500 | 114.00 mm | 212.00 mm | 14.50 mm | Lo demann | |
| 520 10.000 | 87.00 mm | 168.00 mm | 10.00 mm | Lo demann | |
| 520 20.000 | 140.00 mm | 238.00 mm | 20.00 mm | Lo demann | |
| 520 11.000 | 94.00 mm | 175.00 mm | 11.00 mm | Lo demann | |
| 520 28.000 | 170.00 mm | 291.00 mm | 28.00 mm | Lo demann | |
| 520 13.500 | 108.00 mm | 189.00 mm | 13.50 mm | Lo demann | |
| 520 19.000 | 135.00 mm | 233.00 mm | 19.00 mm | Lo demann | |
| 520 23.000 | 155.00 mm | 253.00 mm | 23.00 mm | Lo demann | |
| 520 26.000 | 165.00 mm | 286.00 mm | 26.00 mm | Lo demann | |
| 520 25.000 | 160.00 mm | 281.00 mm | 25.00 mm | Lo demann |