← Katalog
Pas lo zimaz pour agrandi
1134
NC spotting drill 120°
NC spotting drill 120°. Designation: NC spotting drill 120°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4049844154827, Cutting material: HSCO, Surface: bright, Type: N, Standard: Company std., Point angle: 120, Tolerance class nominal diameter: h6, Cutting direction: Right-hand, Type of machine interface: B
Spesifikasyon teknik
- EAN
- 4049844154827
- Type
- N
- Surface
- bright
- Standard
- Company std.
- Designation
- NC spotting drill 120°
- Point angle
- 120
- Diameter range
- 3.000 mm – 20.000 mm
- Cutting material
- HSCO
- Cutting direction
- Right-hand
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
- Type of machine interface
- B
- Tolerance class nominal diameter
- h6
Dimansyon ek kod komann
| Kod komann | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|---|---|
| 1134 3.000 | 12.00 mm | 34.00 mm | 46.00 mm | 3.00 mm | 3.00 mm | Lo demann | |
| 1134 5.000 | 14.00 mm | 48.00 mm | 62.00 mm | 5.00 mm | 5.00 mm | Lo demann | |
| 1134 20.000 | 45.00 mm | 50.00 mm | 131.00 mm | 20.00 mm | 20.00 mm | Lo demann | |
| 1134 10.000 | 25.00 mm | 40.00 mm | 89.00 mm | 10.00 mm | 10.00 mm | Lo demann | |
| 1134 6.000 | 16.00 mm | 36.00 mm | 66.00 mm | 6.00 mm | 6.00 mm | Lo demann | |
| 1134 8.000 | 21.00 mm | 36.00 mm | 79.00 mm | 8.00 mm | 8.00 mm | Lo demann | |
| 1134 12.000 | 30.00 mm | 45.00 mm | 102.00 mm | 12.00 mm | 12.00 mm | Lo demann | |
| 1134 16.000 | 37.50 mm | 48.00 mm | 115.00 mm | 16.00 mm | 16.00 mm | Lo demann | |
| 1134 4.000 | 12.00 mm | 43.00 mm | 55.00 mm | 4.00 mm | 4.00 mm | Lo demann |