← Katalog
Pas lo zimaz pour agrandi
2475
Ratio drill without coolant ducts
Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.700 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":"partial"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4031093360227, Cutting material: Solid carbide, Surface: nanoFIRE, Product family: RT 100 F, Drilling depth: 3xD, Standard: DIN 6537K, Point angle: 140, Tolerance class nominal diameter: m7, Cutting direction: Right-hand, Type of machine interface: HA, Form: A
Spesifikasyon teknik
- EAN
- 4031093360227
- Form
- A
- Surface
- nanoFIRE
- Standard
- DIN 6537K
- Designation
- Ratio drill without coolant ducts
- Point angle
- 140
- Diameter range
- 3.700 mm – 13.000 mm
- Drilling depth
- 3xD
- Product family
- RT 100 F
- Cutting material
- Solid carbide
- Cutting direction
- Right-hand
- TABLE_INFO_PASSON
- [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":"partial"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
- Type of machine interface
- HA
- Tolerance class nominal diameter
- m7
Dimansyon ek kod komann
| Kod komann | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|---|---|
| 2475 6.800 | 34.00 mm | 36.00 mm | 79.00 mm | 8.00 mm | 6.80 mm | Lo demann | |
| 2475 4.650 | 24.00 mm | 36.00 mm | 66.00 mm | 6.00 mm | 4.65 mm | Lo demann | |
| 2475 11.200 | 55.00 mm | 45.00 mm | 102.00 mm | 12.00 mm | 11.20 mm | Lo demann | |
| 2475 6.000 | 28.00 mm | 36.00 mm | 66.00 mm | 6.00 mm | 6.00 mm | Lo demann | |
| 2475 10.500 | 55.00 mm | 45.00 mm | 102.00 mm | 12.00 mm | 10.50 mm | Lo demann | |
| 2475 5.500 | 28.00 mm | 36.00 mm | 66.00 mm | 6.00 mm | 5.50 mm | Lo demann | |
| 2475 9.300 | 47.00 mm | 40.00 mm | 89.00 mm | 10.00 mm | 9.30 mm | Lo demann | |
| 2475 10.000 | 47.00 mm | 40.00 mm | 89.00 mm | 10.00 mm | 10.00 mm | Lo demann | |
| 2475 7.400 | 41.00 mm | 36.00 mm | 79.00 mm | 8.00 mm | 7.40 mm | Lo demann | |
| 2475 12.000 | 55.00 mm | 45.00 mm | 102.00 mm | 12.00 mm | 12.00 mm | Lo demann | |
| 2475 7.000 | 34.00 mm | 36.00 mm | 79.00 mm | 8.00 mm | 7.00 mm | Lo demann | |
| 2475 10.200 | 55.00 mm | 45.00 mm | 102.00 mm | 12.00 mm | 10.20 mm | Lo demann | |
| 2475 5.000 | 28.00 mm | 36.00 mm | 66.00 mm | 6.00 mm | 5.00 mm | Lo demann | |
| 2475 8.000 | 41.00 mm | 36.00 mm | 79.00 mm | 8.00 mm | 8.00 mm | Lo demann | |
| 2475 6.500 | 34.00 mm | 36.00 mm | 79.00 mm | 8.00 mm | 6.50 mm | Lo demann | |
| 2475 3.700 | 20.00 mm | 36.00 mm | 62.00 mm | 6.00 mm | 3.70 mm | Lo demann | |
| 2475 9.000 | 47.00 mm | 40.00 mm | 89.00 mm | 10.00 mm | 9.00 mm | Lo demann | |
| 2475 11.000 | 55.00 mm | 45.00 mm | 102.00 mm | 12.00 mm | 11.00 mm | Lo demann | |
| 2475 13.000 | 60.00 mm | 45.00 mm | 107.00 mm | 14.00 mm | 13.00 mm | Lo demann | |
| 2475 8.500 | 47.00 mm | 40.00 mm | 89.00 mm | 10.00 mm | 8.50 mm | Lo demann |