← Katalog
Pas lo zimaz pour agrandi
4266
Ratio end mill RF 100 AL
Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844099432, Cutting material: Solid carbide, Surface: bright, Product family: RF 100 A, Type: W, Helix angle: 30/29/31, Back rake angle: 8, Length picto milling: long, Number of cutting edges range (from/to): 3, Type of machine interface: ~HA/~HB, Feed direction: with drilling
Spesifikasyon teknik
- EAN
- 4049844099432
- Type
- W
- Surface
- bright
- Designation
- Ratio end mill RF 100 AL
- Helix angle
- 30/29/31
- Diameter range
- 6.350 mm – 25.400 mm
- Feed direction
- with drilling
- Product family
- RF 100 A
- Back rake angle
- 8
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- ~HA/~HB
- Number of cutting edges range (from/to)
- 3
Dimansyon ek kod komann
| Kod komann | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|---|---|
| 4266 6.350 | 27.00 mm | 36.50 mm | 63.50 mm | 6.35 mm | 6.35 mm | Lo demann | |
| 4266 12.700 | 46.00 mm | 45.20 mm | 88.90 mm | 12.70 mm | 12.70 mm | Lo demann | |
| 4266 9.520 | 35.50 mm | 28.00 mm | 63.50 mm | 9.53 mm | 9.53 mm | Lo demann | |
| 4266 15.870 | 48.00 mm | 48.40 mm | 88.90 mm | 15.88 mm | 15.88 mm | Lo demann | |
| 4266 19.050 | 57.00 mm | 51.60 mm | 101.60 mm | 19.05 mm | 19.05 mm | Lo demann | |
| 4266 25.400 | 59.00 mm | 58.00 mm | 101.60 mm | 25.40 mm | 25.40 mm | Lo demann | |
| 4266 7.940 | 28.50 mm | 35.00 mm | 63.50 mm | 7.94 mm | 7.94 mm | Lo demann |