← Katalog
Pas lo zimaz pour agrandi
3733
Ratio end mill RF 100 VA
Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4049844018051, Cutting material: Solid carbide, Surface: nanoA, Product family: RF 100 VA, Type: N, Helix angle: 36/38, Back rake angle: 7, Length picto milling: medium, Number of cutting edges range (from/to): 4, Type of machine interface: HA
Spesifikasyon teknik
- EAN
- 4049844018051
- Type
- N
- Surface
- nanoA
- Designation
- Ratio end mill RF 100 VA
- Helix angle
- 36/38
- Diameter range
- 6.000 mm – 20.000 mm
- Product family
- RF 100 VA
- Back rake angle
- 7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
- Length picto milling
- medium
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 4
Dimansyon ek kod komann
| Kod komann | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|---|---|
| 3733 20.000 | 38.00 mm | 50.00 mm | 126.00 mm | 20.00 mm | 20.00 mm | Lo demann | |
| 3733 12.000 | 24.00 mm | 45.00 mm | 93.00 mm | 12.00 mm | 12.00 mm | Lo demann | |
| 3733 8.000 | 17.00 mm | 36.00 mm | 75.00 mm | 8.00 mm | 8.00 mm | Lo demann | |
| 3733 6.000 | 15.00 mm | 36.00 mm | 65.00 mm | 6.00 mm | 6.00 mm | Lo demann | |
| 3733 16.000 | 32.00 mm | 48.00 mm | 108.00 mm | 16.00 mm | 16.00 mm | Lo demann |