← Katalog
Pas lo zimaz pour agrandi
6877
Ratio roughing end mill RF 100 VA
Ratio roughing end mill RF 100 VA. Designation: Ratio roughing end mill RF 100 VA, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4049844268227, Cutting material: Solid carbide, Surface: nanoA, Product family: RF 100 VA, Type: N, Helix angle: 36/38, Back rake angle: 7, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Feed direction: with drilling
Spesifikasyon teknik
- EAN
- 4049844268227
- Type
- N
- Surface
- nanoA
- Designation
- Ratio roughing end mill RF 100 VA
- Helix angle
- 36/38
- Diameter range
- 5.000 mm – 25.000 mm
- Feed direction
- with drilling
- Product family
- RF 100 VA
- Back rake angle
- 7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 4
Dimansyon ek kod komann
| Kod komann | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|---|---|
| 6877 10.000 | 28.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Lo demann | |
| 6877 8.000 | 24.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Lo demann | |
| 6877 12.000 | 34.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Lo demann | |
| 6877 14.000 | 35.00 mm | 45.00 mm | 83.00 mm | 14.00 mm | 14.00 mm | Lo demann | |
| 6877 16.000 | 42.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Lo demann | |
| 6877 9.000 | 25.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 9.00 mm | Lo demann | |
| 6877 5.000 | 16.50 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.00 mm | Lo demann | |
| 6877 18.000 | 43.00 mm | 48.00 mm | 92.00 mm | 18.00 mm | 18.00 mm | Lo demann | |
| 6877 7.000 | 21.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 7.00 mm | Lo demann | |
| 6877 6.000 | 18.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | Lo demann | |
| 6877 20.000 | 50.00 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | Lo demann | |
| 6877 25.000 | 60.00 mm | 56.00 mm | 121.00 mm | 25.00 mm | 25.00 mm | Lo demann |