← Katalog
Pas lo zimaz pour agrandi
6756
Roughing end mill GS 80 (fine teeth)
Roughing end mill GS 80 (fine teeth). Designation: Roughing end mill GS 80 (fine teeth), Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4049844143548, Type: N, Helix angle: 45, Back rake angle: 11, Length picto milling: long, Number of cutting edges range (from/to): 3-6, Type of machine interface: B, Corner design: Schneidecke 90°, Feed direction: with drilling
Spesifikasyon teknik
- EAN
- 4049844143548
- Type
- N
- Designation
- Roughing end mill GS 80 (fine teeth)
- Helix angle
- 45
- Corner design
- Schneidecke 90°
- Diameter range
- 4.000 mm – 25.000 mm
- Feed direction
- with drilling
- Back rake angle
- 11
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- B
- Number of cutting edges range (from/to)
- 3-6
Dimansyon ek kod komann
| Kod komann | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|---|---|
| 6756 20.000 | 45.00 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | Lo demann | |
| 6756 16.000 | 37.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Lo demann | |
| 6756 4.000 | 14.00 mm | 36.00 mm | 55.00 mm | 6.00 mm | 4.00 mm | Lo demann | |
| 6756 6.000 | 16.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | Lo demann | |
| 6756 10.000 | 26.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Lo demann | |
| 6756 18.000 | 37.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 18.00 mm | Lo demann | |
| 6756 5.000 | 16.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.00 mm | Lo demann | |
| 6756 12.000 | 31.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Lo demann | |
| 6756 14.000 | 31.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 14.00 mm | Lo demann | |
| 6756 8.000 | 23.00 mm | 40.00 mm | 69.00 mm | 10.00 mm | 8.00 mm | Lo demann | |
| 6756 9.000 | 23.00 mm | 40.00 mm | 69.00 mm | 10.00 mm | 9.00 mm | Lo demann | |
| 6756 7.000 | 20.00 mm | 40.00 mm | 66.00 mm | 10.00 mm | 7.00 mm | Lo demann | |
| 6756 25.000 | 54.00 mm | 56.00 mm | 121.00 mm | 25.00 mm | 25.00 mm | Lo demann |