← Katalog
Pas lo zimaz pour agrandi
408
Shell reamer
Shell reamer. Designation: Shell reamer, Diameter range: 25.000 mm – 100.000 mm, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4031093116824, Cutting material: HSS-E, Surface: steam tempered, Standard: DIN 219, Tolerance class hole: H7, Helix angle: 7, Back rake angle: 5, Form: B, Hole type: Through-hole, Cutting direction: Right-hand
Spesifikasyon teknik
- EAN
- 4031093116824
- Form
- B
- Surface
- steam tempered
- Standard
- DIN 219
- Hole type
- Through-hole
- Designation
- Shell reamer
- Helix angle
- 7
- Diameter range
- 25.000 mm – 100.000 mm
- Back rake angle
- 5
- Cutting material
- HSS-E
- Cutting direction
- Right-hand
- Internal diameter
- 16.00 mm
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
- Tolerance class hole
- H7
Dimansyon ek kod komann
| Kod komann | Flute length | Total length | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|
| 408 34.000 | 45.00 mm | 50.00 mm | 34.00 mm | Lo demann | |
| 408 33.000 | 45.00 mm | 50.00 mm | 33.00 mm | Lo demann | |
| 408 31.000 | 45.00 mm | 50.00 mm | 31.00 mm | Lo demann | |
| 408 60.000 | 63.00 mm | 71.00 mm | 60.00 mm | Lo demann | |
| 408 55.000 | 63.00 mm | 71.00 mm | 55.00 mm | Lo demann | |
| 408 80.000 | 80.00 mm | 90.00 mm | 80.00 mm | Lo demann | |
| 408 45.000 | 56.00 mm | 63.00 mm | 45.00 mm | Lo demann | |
| 408 36.000 | 50.00 mm | 56.00 mm | 36.00 mm | Lo demann | |
| 408 65.000 | 71.00 mm | 80.00 mm | 65.00 mm | Lo demann | |
| 408 82.000 | 80.00 mm | 90.00 mm | 82.00 mm | Lo demann | |
| 408 42.000 | 50.00 mm | 56.00 mm | 42.00 mm | Lo demann | |
| 408 62.000 | 71.00 mm | 80.00 mm | 62.00 mm | Lo demann | |
| 408 27.000 | 40.00 mm | 45.00 mm | 27.00 mm | Lo demann | |
| 408 35.000 | 45.00 mm | 50.00 mm | 35.00 mm | Lo demann | |
| 408 26.000 | 40.00 mm | 45.00 mm | 26.00 mm | Lo demann | |
| 408 85.000 | 80.00 mm | 90.00 mm | 85.00 mm | Lo demann | |
| 408 38.000 | 50.00 mm | 56.00 mm | 38.00 mm | Lo demann | |
| 408 28.000 | 40.00 mm | 45.00 mm | 28.00 mm | Lo demann | |
| 408 30.000 | 40.00 mm | 45.00 mm | 30.00 mm | Lo demann | |
| 408 75.000 | 80.00 mm | 90.00 mm | 75.00 mm | Lo demann | |
| 408 78.000 | 80.00 mm | 90.00 mm | 78.00 mm | Lo demann | |
| 408 48.000 | 56.00 mm | 63.00 mm | 48.00 mm | Lo demann | |
| 408 92.000 | 90.00 mm | 100.00 mm | 92.00 mm | Lo demann | |
| 408 32.000 | 45.00 mm | 50.00 mm | 32.00 mm | Lo demann | |
| 408 88.000 | 90.00 mm | 100.00 mm | 88.00 mm | Lo demann | |
| 408 44.000 | 56.00 mm | 63.00 mm | 44.00 mm | Lo demann | |
| 408 46.000 | 56.00 mm | 63.00 mm | 46.00 mm | Lo demann | |
| 408 70.000 | 71.00 mm | 80.00 mm | 70.00 mm | Lo demann | |
| 408 58.000 | 63.00 mm | 71.00 mm | 58.00 mm | Lo demann | |
| 408 40.000 | 50.00 mm | 56.00 mm | 40.00 mm | Lo demann | |
| 408 50.000 | 56.00 mm | 63.00 mm | 50.00 mm | Lo demann | |
| 408 100.000 | 90.00 mm | 100.00 mm | 100.00 mm | Lo demann | |
| 408 52.000 | 63.00 mm | 71.00 mm | 52.00 mm | Lo demann | |
| 408 29.000 | 40.00 mm | 45.00 mm | 29.00 mm | Lo demann | |
| 408 47.000 | 56.00 mm | 63.00 mm | 47.00 mm | Lo demann | |
| 408 68.000 | 71.00 mm | 80.00 mm | 68.00 mm | Lo demann | |
| 408 98.000 | — | — | — | Lo demann | |
| 408 25.000 | 40.00 mm | 45.00 mm | 25.00 mm | Lo demann |