Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.175 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844003422, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 2, Feed direction: with drilling

Spesifikasyon teknik

EAN: 4049844003422
Type: N
Designation: Slot drill (2-fluted)
Helix angle: 30
Diameter range: 3.175 mm – 12.700 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: long
Number of cutting edges range (from/to): 2

Dimansyon ek kod komann

Kod komann	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibilite
3088 6.352	36.50 mm	39.70 mm	76.20 mm	6.35 mm	6.35 mm	Lo demann
3088 6.356	36.50 mm	39.70 mm	76.20 mm	6.35 mm	6.35 mm	Lo demann
3088 9.526	38.50 mm	37.70 mm	76.20 mm	9.53 mm	9.53 mm	Lo demann
3088 12.706	65.00 mm	49.30 mm	114.30 mm	12.70 mm	12.70 mm	Lo demann
3088 12.704	65.00 mm	49.30 mm	114.30 mm	12.70 mm	12.70 mm	Lo demann
3088 3.174	17.00 mm	33.80 mm	50.80 mm	3.17 mm	3.17 mm	Lo demann
3088 12.702	65.00 mm	49.30 mm	114.30 mm	12.70 mm	12.70 mm	Lo demann
3088 9.522	38.50 mm	37.70 mm	76.20 mm	9.53 mm	9.53 mm	Lo demann
3088 6.354	36.50 mm	39.70 mm	76.20 mm	6.35 mm	6.35 mm	Lo demann
3088 3.172	17.00 mm	33.80 mm	50.80 mm	3.17 mm	3.17 mm	Lo demann
3088 9.524	38.50 mm	37.70 mm	76.20 mm	9.53 mm	9.53 mm	Lo demann