← Katalog
Pas lo zimaz pour agrandi
3092
Slot drill (2-fluted)
Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.590 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4031093762038, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: short, Number of cutting edges range (from/to): 2, Feed direction: with drilling
Spesifikasyon teknik
- EAN
- 4031093762038
- Type
- N
- Designation
- Slot drill (2-fluted)
- Helix angle
- 30
- Diameter range
- 1.590 mm – 19.050 mm
- Feed direction
- with drilling
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
- Length picto milling
- short
- Number of cutting edges range (from/to)
- 2
Dimansyon ek kod komann
| Kod komann | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|---|---|
| 3092 1.590 | 5.70 mm | 43.10 mm | 50.80 mm | 3.17 mm | 1.59 mm | Lo demann | |
| 3092 3.170 | 11.00 mm | 39.80 mm | 50.80 mm | 3.17 mm | 3.17 mm | Lo demann | |
| 3092 12.700 | 30.00 mm | 33.50 mm | 63.50 mm | 12.70 mm | 12.70 mm | Lo demann | |
| 3092 15.870 | 35.00 mm | 41.20 mm | 76.20 mm | 15.88 mm | 15.88 mm | Lo demann | |
| 3092 9.520 | 26.00 mm | 24.80 mm | 50.80 mm | 9.53 mm | 9.53 mm | Lo demann | |
| 3092 19.050 | 44.50 mm | 31.70 mm | 76.20 mm | 19.05 mm | 19.05 mm | Lo demann | |
| 3092 6.350 | 20.70 mm | 30.10 mm | 50.80 mm | 6.35 mm | 6.35 mm | Lo demann | |
| 3092 7.940 | 20.70 mm | 30.10 mm | 50.80 mm | 7.94 mm | 7.94 mm | Lo demann | |
| 3092 4.760 | 15.00 mm | 35.80 mm | 50.80 mm | 4.76 mm | 4.76 mm | Lo demann | |
| 3092 11.110 | 28.00 mm | 35.50 mm | 63.50 mm | 11.11 mm | 11.11 mm | Lo demann |