Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093672320, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: short, Number of cutting edges range (from/to): 2, Type of machine interface: HB, Feed direction: with drilling

Spesifikasyon teknik

EAN: 4031093672320
Type: N
Designation: Slot drill (2-fluted)
Helix angle: 30
Diameter range: 2.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: short
Type of machine interface: HB
Number of cutting edges range (from/to): 2

Dimansyon ek kod komann

Kod komann	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibilite
3634 12.000	25.00 mm	45.00 mm	73.00 mm	12.00 mm	12.00 mm	Lo demann
3634 10.000	21.00 mm	40.00 mm	66.00 mm	10.00 mm	10.00 mm	Lo demann
3634 8.000	17.00 mm	36.00 mm	58.00 mm	8.00 mm	8.00 mm	Lo demann
3634 20.000	39.00 mm	50.00 mm	92.00 mm	20.00 mm	20.00 mm	Lo demann
3634 2.000	5.50 mm	36.00 mm	50.00 mm	6.00 mm	2.00 mm	Lo demann
3634 14.000	28.00 mm	45.00 mm	75.00 mm	14.00 mm	14.00 mm	Lo demann
3634 6.000	14.00 mm	36.00 mm	54.00 mm	6.00 mm	6.00 mm	Lo demann
3634 3.000	8.00 mm	36.00 mm	50.00 mm	6.00 mm	3.00 mm	Lo demann
3634 4.000	9.50 mm	36.00 mm	54.00 mm	6.00 mm	4.00 mm	Lo demann
3634 18.000	35.00 mm	48.00 mm	84.00 mm	18.00 mm	18.00 mm	Lo demann
3634 5.000	11.50 mm	36.00 mm	54.00 mm	6.00 mm	5.00 mm	Lo demann
3634 16.000	32.00 mm	48.00 mm	82.00 mm	16.00 mm	16.00 mm	Lo demann