← Katalog
Pas lo zimaz pour agrandi
3456
Slot drill (3-fluted)
Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 26.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093539562, Cutting material: M42, Surface: bright, Helix angle: 30, Back rake angle: 11, Number of cutting edges range (from/to): 2, Type of machine interface: D, Corner design: Schneidecke 90°
Spesifikasyon teknik
- EAN
- 4031093539562
- Surface
- bright
- Designation
- Slot drill (3-fluted)
- Helix angle
- 30
- Corner design
- Schneidecke 90°
- Diameter range
- 2.000 mm – 26.000 mm
- Back rake angle
- 11
- Cutting material
- M42
- TABLE_INFO_PASSON
- [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Type of machine interface
- D
- Number of cutting edges range (from/to)
- 2
Dimansyon ek kod komann
| Kod komann | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|---|---|
| 3456 6.000 | 11.00 mm | 36.00 mm | 52.00 mm | 6.00 mm | 6.00 mm | Lo demann | |
| 3456 15.000 | 21.00 mm | 45.00 mm | 73.00 mm | 12.00 mm | 15.00 mm | Lo demann | |
| 3456 5.000 | 11.00 mm | 36.00 mm | 52.00 mm | 6.00 mm | 5.00 mm | Lo demann | |
| 3456 24.000 | 35.00 mm | 56.00 mm | 102.00 mm | 25.00 mm | 24.00 mm | Lo demann | |
| 3456 8.000 | 15.00 mm | 40.00 mm | 61.00 mm | 10.00 mm | 8.00 mm | Lo demann | |
| 3456 7.000 | 14.00 mm | 40.00 mm | 60.00 mm | 10.00 mm | 7.00 mm | Lo demann | |
| 3456 22.000 | 29.00 mm | 50.00 mm | 88.00 mm | 20.00 mm | 22.00 mm | Lo demann | |
| 3456 26.000 | 35.00 mm | 56.00 mm | 102.00 mm | 25.00 mm | 26.00 mm | Lo demann | |
| 3456 4.000 | 10.00 mm | 36.00 mm | 51.00 mm | 6.00 mm | 4.00 mm | Lo demann | |
| 3456 18.000 | 24.00 mm | 48.00 mm | 79.00 mm | 16.00 mm | 18.00 mm | Lo demann | |
| 3456 2.000 | 7.00 mm | 36.00 mm | 48.00 mm | 6.00 mm | 2.00 mm | Lo demann | |
| 3456 9.000 | 15.00 mm | 40.00 mm | 61.00 mm | 10.00 mm | 9.00 mm | Lo demann | |
| 3456 16.000 | 24.00 mm | 48.00 mm | 79.00 mm | 16.00 mm | 16.00 mm | Lo demann | |
| 3456 22.001 | 29.00 mm | 50.00 mm | 88.00 mm | 20.00 mm | 22.00 mm | Lo demann | |
| 3456 10.000 | — | — | — | — | — | Lo demann | |
| 3456 30.000 | — | — | — | — | — | Lo demann | |
| 3456 11.000 | — | — | — | — | — | Lo demann | |
| 3456 17.000 | — | — | — | — | — | Lo demann | |
| 3456 3.000 | — | — | — | — | — | Lo demann | |
| 3456 20.001 | — | — | — | — | — | Lo demann | |
| 3456 19.000 | — | — | — | — | — | Lo demann | |
| 3456 13.000 | — | — | — | — | — | Lo demann | |
| 3456 20.000 | — | — | — | — | — | Lo demann | |
| 3456 25.000 | 35.00 mm | 56.00 mm | 102.00 mm | 25.00 mm | 25.00 mm | Lo demann |