Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093374934, Cutting material: Solid carbide, Surface: bright, Type: N, Helix angle: 45, Back rake angle: 7, Number of cutting edges range (from/to): 3, Type of machine interface: HB

Spesifikasyon teknik

EAN: 4031093374934
Type: N
Surface: bright
Designation: Slot drill GH 100 U (3-fluted)
Helix angle: 45
Diameter range: 3.000 mm – 20.000 mm
Back rake angle: 7
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Type of machine interface: HB
Number of cutting edges range (from/to): 3

Dimansyon ek kod komann

Kod komann	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibilite
3286 10.000	27.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Lo demann
3286 4.500	12.00 mm	36.00 mm	57.00 mm	6.00 mm	4.50 mm	Lo demann
3286 20.000	46.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Lo demann
3286 7.000	20.00 mm	36.00 mm	63.00 mm	8.00 mm	7.00 mm	Lo demann
3286 3.000	10.00 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Lo demann
3286 5.000	14.00 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Lo demann
3286 18.000	38.00 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	Lo demann
3286 16.000	37.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Lo demann
3286 6.000	16.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Lo demann
3286 9.000	24.00 mm	40.00 mm	72.00 mm	10.00 mm	9.00 mm	Lo demann
3286 4.000	11.00 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Lo demann
3286 3.500	10.00 mm	36.00 mm	57.00 mm	6.00 mm	3.50 mm	Lo demann
3286 14.000	32.00 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Lo demann
3286 8.000	23.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Lo demann
3286 12.000	31.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Lo demann