Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}], EAN: 4031093389341, Cutting material: Solid carbide, Product family: RF 100 U, Type: N, Helix angle: 35/38, Back rake angle: 4, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HB, Feed direction: with drilling

Spesifikasyon teknik

EAN: 4031093389341
Type: N
Designation: Standard Ratio end mill RF 100 U
Helix angle: 35/38
Diameter range: 3.000 mm – 25.000 mm
Feed direction: with drilling
Product family: RF 100 U
Back rake angle: 4
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: HB
Number of cutting edges range (from/to): 4

Dimansyon ek kod komann

Kod komann	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibilite
3732 8.000	24.36 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Lo demann
3732 14.000	35.38 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Lo demann
3732 18.000	43.70 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	Lo demann
3732 16.000	42.40 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Lo demann
3732 5.000	16.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Lo demann
3732 6.000	17.20 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Lo demann
3732 10.000	28.70 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Lo demann
3732 12.000	34.04 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Lo demann
3732 3.000	10.10 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Lo demann
3732 4.000	13.80 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Lo demann
3732 20.000	51.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Lo demann
3732 25.000	61.25 mm	56.00 mm	121.00 mm	25.00 mm	25.00 mm	Lo demann