← Katalog
Pas lo zimaz pour agrandi
6768
Standard Ratio end mill RF 100 U
Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}], EAN: 4049844155565, Cutting material: Solid carbide, Product family: RF 100 U, Type: N, Helix angle: 38, Back rake angle: 4, Length picto milling: 4xD, Number of cutting edges range (from/to): 4, Type of machine interface: HB, Feed direction: lateral
Spesifikasyon teknik
- EAN
- 4049844155565
- Type
- N
- Designation
- Standard Ratio end mill RF 100 U
- Helix angle
- 38
- Diameter range
- 6.000 mm – 25.000 mm
- Feed direction
- lateral
- Product family
- RF 100 U
- Back rake angle
- 4
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}]
- Length picto milling
- 4xD
- Type of machine interface
- HB
- Number of cutting edges range (from/to)
- 4
Dimansyon ek kod komann
| Kod komann | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|---|---|
| 6768 8.000 | 37.00 mm | 36.00 mm | 75.00 mm | 8.00 mm | 8.00 mm | Lo demann | |
| 6768 6.000 | 29.00 mm | 36.00 mm | 65.00 mm | 6.00 mm | 6.00 mm | Lo demann | |
| 6768 10.000 | 46.00 mm | 40.00 mm | 100.00 mm | 10.00 mm | 10.00 mm | Lo demann | |
| 6768 20.000 | 92.00 mm | 50.00 mm | 150.00 mm | 20.00 mm | 20.00 mm | Lo demann | |
| 6768 12.000 | 56.00 mm | 45.00 mm | 100.00 mm | 12.00 mm | 12.00 mm | Lo demann | |
| 6768 16.000 | 74.00 mm | 48.00 mm | 125.00 mm | 16.00 mm | 16.00 mm | Lo demann | |
| 6768 25.000 | 115.00 mm | 56.00 mm | 175.00 mm | 25.00 mm | 25.00 mm | Lo demann |