← Katalog
Pas lo zimaz pour agrandi
3570
T-slot end mill
T-slot end mill. Designation: T-slot end mill, Diameter range: 12.500 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093383400, Cutting material: HSCO, Surface: bright, Type: N, Helix angle: 10, Back rake angle: 10, Number of cutting edges range (from/to): 6-8, Type of machine interface: B, Corner design: Schneidecke 90°, Feed direction: lateral
Spesifikasyon teknik
- EAN
- 4031093383400
- Type
- N
- Surface
- bright
- Designation
- T-slot end mill
- Helix angle
- 10
- Corner design
- Schneidecke 90°
- Diameter range
- 12.500 mm – 32.000 mm
- Feed direction
- lateral
- Back rake angle
- 10
- Cutting material
- HSCO
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Type of machine interface
- B
- Number of cutting edges range (from/to)
- 6-8
Dimansyon ek kod komann
| Kod komann | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|---|---|
| 3570 32.000 | 14.00 mm | 48.00 mm | 90.00 mm | 16.00 mm | 32.00 mm | Lo demann | |
| 3570 22.000 | 10.00 mm | 45.00 mm | 75.00 mm | 12.00 mm | 22.00 mm | Lo demann | |
| 3570 18.000 | 8.00 mm | 45.00 mm | 70.00 mm | 12.00 mm | 18.00 mm | Lo demann | |
| 3570 19.000 | 9.00 mm | 45.00 mm | 71.00 mm | 12.00 mm | 19.00 mm | Lo demann | |
| 3570 28.000 | 12.00 mm | 48.00 mm | 85.00 mm | 16.00 mm | 28.00 mm | Lo demann | |
| 3570 16.000 | 8.00 mm | 40.00 mm | 62.00 mm | 10.00 mm | 16.00 mm | Lo demann | |
| 3570 12.500 | 6.00 mm | 40.00 mm | 57.00 mm | 10.00 mm | 12.50 mm | Lo demann | |
| 3570 21.000 | 9.00 mm | 45.00 mm | 74.00 mm | 12.00 mm | 21.00 mm | Lo demann | |
| 3570 25.000 | 11.00 mm | 48.00 mm | 82.00 mm | 16.00 mm | 25.00 mm | Lo demann |