← Katalog
Pas lo zimaz pour agrandi
532
Taper pin drills
Taper pin drills. Designation: Taper pin drills, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093156806, Cutting material: HSS, Surface: steam tempered, Type: N, Standard: DIN 1898, Point angle: 118, Cutting direction: Right-hand, Type of machine interface: MK
Spesifikasyon teknik
- EAN
- 4031093156806
- Type
- N
- Surface
- steam tempered
- Standard
- DIN 1898
- Designation
- Taper pin drills
- Point angle
- 118
- Diameter range
- 5.000 mm – 25.000 mm
- Cutting material
- HSS
- Cutting direction
- Right-hand
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Type of machine interface
- MK
Dimansyon ek kod komann
| Kod komann | Flute length | Total length | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|
| 532 5.000 | 81.00 mm | 155.00 mm | 5.00 mm | Lo demann | |
| 532 12.000 | 219.00 mm | 315.00 mm | 12.00 mm | Lo demann | |
| 532 10.000 | 180.00 mm | 257.00 mm | 10.00 mm | Lo demann | |
| 532 13.000 | 229.00 mm | 325.00 mm | 13.00 mm | Lo demann | |
| 532 6.000 | 108.00 mm | 187.00 mm | 6.00 mm | Lo demann | |
| 532 20.000 | 263.00 mm | 377.00 mm | 20.00 mm | Lo demann | |
| 532 14.000 | 229.00 mm | 325.00 mm | 14.00 mm | Lo demann | |
| 532 16.000 | 239.00 mm | 335.00 mm | 16.00 mm | Lo demann | |
| 532 8.000 | 149.00 mm | 227.00 mm | 8.00 mm | Lo demann | |
| 532 25.000 | 311.00 mm | 427.00 mm | 25.00 mm | Lo demann |