← Katalog
Pas lo zimaz pour agrandi
3510
Thread milling cutter for ISO metric threads
Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4031093622899, Cutting material: Solid carbide, Surface: bright, Product family: TMC-SP, Cutting direction: Right-hand, Type of machine interface: HA, Drilling depth: 1,5xD, Hole type: Through-hole, blind hole drilling
Spesifikasyon teknik
- EAN
- 4031093622899
- Surface
- bright
- Hole type
- Through-hole, blind hole drilling
- Designation
- Thread milling cutter for ISO metric threads
- Drilling depth
- 1,5xD
- Product family
- TMC-SP
- Cutting material
- Solid carbide
- Cutting direction
- Right-hand
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
- Type of machine interface
- HA
Dimansyon ek kod komann
| Kod komann | Flute length | Shank length | Total length | Shank diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|---|
| 3510 6.000 | 15.00 mm | 36.00 mm | 62.00 mm | 8.00 mm | Lo demann | |
| 3510 20.000 | 48.00 mm | 50.00 mm | 125.00 mm | 20.00 mm | Lo demann | |
| 3510 3.000 | 8.00 mm | 36.00 mm | 48.00 mm | 6.00 mm | Lo demann | |
| 3510 14.000 | 36.00 mm | 48.00 mm | 102.00 mm | 16.00 mm | Lo demann | |
| 3510 8.000 | 20.00 mm | 40.00 mm | 74.00 mm | 10.00 mm | Lo demann | |
| 3510 4.000 | 10.00 mm | 36.00 mm | 48.00 mm | 6.00 mm | Lo demann | |
| 3510 12.000 | 30.00 mm | 45.00 mm | 90.00 mm | 14.00 mm | Lo demann | |
| 3510 10.000 | 25.00 mm | 45.00 mm | 80.00 mm | 12.00 mm | Lo demann | |
| 3510 5.000 | 13.00 mm | 36.00 mm | 54.00 mm | 6.00 mm | Lo demann | |
| 3510 16.000 | 40.00 mm | 48.00 mm | 102.00 mm | 18.00 mm | Lo demann |