← Katalog
Pas lo zimaz pour agrandi
351
Twist drill
Twist drill. Designation: Twist drill, Diameter range: 10.000 mm – 31.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093112062, Cutting material: HSCO, Surface: steam tempered, Type: N, Drilling depth: ~5xD, Standard: DIN 346, Point angle: 118, Tolerance class nominal diameter: h8, Cutting direction: Right-hand, Type of machine interface: MK
Spesifikasyon teknik
- EAN
- 4031093112062
- Type
- N
- Surface
- steam tempered
- Standard
- DIN 346
- Designation
- Twist drill
- Point angle
- 118
- Diameter range
- 10.000 mm – 31.500 mm
- Drilling depth
- ~5xD
- Cutting material
- HSCO
- Cutting direction
- Right-hand
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Type of machine interface
- MK
- Tolerance class nominal diameter
- h8
Dimansyon ek kod komann
| Kod komann | Flute length | Total length | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|
| 351 18.500 | 135.00 mm | 256.00 mm | 18.50 mm | Lo demann | |
| 351 30.000 | 175.00 mm | 324.00 mm | 30.00 mm | Lo demann | |
| 351 12.000 | 101.00 mm | 199.00 mm | 12.00 mm | Lo demann | |
| 351 23.000 | 155.00 mm | 276.00 mm | 23.00 mm | Lo demann | |
| 351 31.500 | 180.00 mm | 329.00 mm | 31.50 mm | Lo demann | |
| 351 13.000 | 101.00 mm | 199.00 mm | 13.00 mm | Lo demann | |
| 351 20.000 | 140.00 mm | 261.00 mm | 20.00 mm | Lo demann | |
| 351 14.000 | 108.00 mm | 206.00 mm | 14.00 mm | Lo demann | |
| 351 29.000 | — | — | — | Lo demann | |
| 351 22.750 | — | — | — | Lo demann |